749638
32
Zoom out
Zoom in
Previous page
1/146
Next page
GBIE 29 SAST 18 A1
Information about the batteries
The appliance runs on rechargeable lithium-ion batteries. Before using the
appliance for the first time, the batteries must be charged. The charge
indicator lamp w flashes red during charging. As soon as the batteries are
fully charged, the charge indicator lamp w lights up green.
If the charge indicator lamp w flashes alternately green and red, the battery
is almost completely discharged and the appliance switches off after approx.
1 minute. This protects the appliance from deep discharge.
Installation of the wall bracket
DANGER! ELECTRIC SHOCK!
Ensure that there are no power cables or water pipes in the wall at the
location where you intend to drill the holes for the wall bracket 7.
Drilling into a current-carrying electric cable can be potentially fatal!
1) Select a suitable installation location for the wall bracket 7:
It must be possible to remove the handheld vacuum cleaner easily and there
must be a mains power socket nearby. In addition, there should be no power
or water lines in the wall.
2) Drill two holes below each other at a distance of approx. 110 mm from each
other. The drill holes must be suitable for 5 mm wall plugs.
3) Push in the wall plugs and screw in the screws so that the heads protrude a
few millimetres.
4) Hang the wall bracket 7 with the drill holes over the two screws and ensure
that the screws slide into the slots. The wall bracket 7 should lie flush
against the wall. You can adjust the distance to the wall and compensate for
any unevenness in the wall by screwing in or unscrewing the screws.
5) Ensure that the power cable is not trapped and that it lies properly in the
cut-out.
6) Push the two accessories holders 8 into the respective catches on the left
and right of the wall bracket 7. You can place the nozzles in the
accessories holders 8.
7) Place the barrel plug 9 of the power adapter 0 into the wall bracket 7
from below. Secure the barrel plug 9 by turning it.
8) Plug the mains adapter 0 into a power socket.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 338031 SAST 18 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 338031 SAST 18 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info