Manual Silvercrest IAN 337390 SDBE 2600 B2 (page 23 of 82) (English, German, Dutch, French, Polish)

749525

Zoom out

Zoom in

1/82

23 GB/IE

Filling the water tank

mDANGER! Risk of electric shock! Always

disconnect the power plug

from the power

outlet before ﬁlling the water tank.

mATTENTION! Fill the water tank with tap water

or distilled water without any additives. If your

tap water is hard, use distilled water. Where the

water is moderately hard, mix distilled water and

tap water at a ratio of 1:1.

mATTENTION! Use the measuring cup

to ﬁll

water into the water tank.

NOTE: The water tank has a ﬁlling capacity of

approximately 370 ml.

NOTE: The max mark

that marks the

maximum ﬁlling capacity applies when the

product is set up vertically on the base

1. Place the product on the base

and tip it

forward at approximately 45°.

2. Open the lid of the ﬁll opening

3. Carefully pour water into the water tank. Do not

exceed the max mark

4. Close the lid of the ﬁll opening

Spray function

You can spray the fabric in front of the soleplate

with water as required. To do so, press the

spray button

Steam burst

You can steam the fabric through the soleplate

as required. To do so, press the steam button

NOTES:

You can also use the steam burst in a

vertical position.

The higher the set temperature, the stronger the

steam burst.

Steam ironing

You can also set the iron to continuously give oﬀ

steam.

The temperature control

should be at the

highest level to produce enough steam.

The steam control

has 3 positions:

steam

Medium

steam

Maximum

steam

NOTE: Continuous steam ironing is only possible

when the iron is held horizontally. If you hold the

iron vertically or set it down, this interrupts steam

operation.

Ending ironing

1. Turn the temperature control

counter-clockwise

all the way to MIN.

2. Set down the product with the base

on an

even, stable surface.

3. Disconnect the power plug

from the power

outlet.

4. Let the product cool (this take approximately

15 minutes). Do not leave the product

unattended while it is still hot.

5. To prevent limescale build-up, empty the water

tank after each use. To do so, open the lid of the

ﬁll opening

. Empty the water tank via the ﬁll

opening

by holding the iron upside down over

a sink.

Additional product features

Anti-drip system

The product features an anti-drip system. This

prevents water from exiting from the soleplate

as long as the temperature is too low to produce

steam. This feature prevents water stains on your

clothing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 337390 SDBE 2600 B2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 337390 SDBE 2600 B2 Manual

Product: