Manual Silvercrest IAN 331472 VE 6035SCR (page 20 of 74) (English, German, Dutch, French, Polish, Swedish)

750511

Zoom out

Zoom in

1/74

20 GB/IE

Risk of damage of the product

Only use the speciﬁed type of

battery / rechargeable battery!

Insert batteries / rechargeable

batteries according to polarity

marks (+) and (-) on the battery /

rechargeable battery and the

product.

lean the contacts on the battery /

rechargeable battery and in the

battery compartment before in-

serting!

Remove exhausted batteries /

rechargeable batteries from the

product immediately.

Installation

Note: A cross-head screwdriver is required to

assemble the product.

Remove the product and the accessories from

the packaging.

Assemble the base parts 16 in the shape of a

cross.

Screw the pole 13 to the base parts 16 using

the mounting plate 15 . Use the four cross-head

screws 17 to do this.

Remove the height adjustment ring 12 by rotating

it anticlockwise.

Push the cap 14 over the pole 13 . Then place the

height adjustment ring 12 back on the pole 13 .

Pull the internal pole 11 out of the pole 13 .

Secure the internal pole 11 by turning the height

adjustment ring 12 clockwise to tighten it.

Remove the fastening screw 10 by turning it

anticlockwise.

Push the motor 9 onto the internal pole 11

and attach it using the fastening screw 10 .

Turn it clockwise to tighten.

Remove the rear grille locknut 5. To do this,

turn it anticlockwise.

Place the rear grille 6 on the motor 9 as

shown in Fig. D. Please ensure that the handle

on the rear grille 6 is located at the top.

Attach the rear grille 6 using the rear grille

locknut 5. Turn it clockwise to tighten.

Remove the protective cover from the axle 7.

Push the blades 4 onto the axle 7. Ensure that

the smooth side of the axle 7 is facing down.

Place the blade cover 3 onto the axle 7

and turn it anticlockwise to tighten it.

Hang the front grille 1 on the rear grille 6

using the hook 2. Connect both grilles 1 6

using the provided screw 19 and nut.

Then close the fastening clamps.

Before ﬁrst use

Place the product on a ﬂat and stable surface

and ensure that there is a minimum of 10 cm of

clear space around the product. This product is

not suitable for connection or use in a cupboard

or outdoors.

Connect the mains cable to the socket.

Note: Before connecting the product, ensure

that the main voltage speciﬁed on the product

matches the local line voltage (Voltage:

220–240 V ∼).

Inserting / changing the battery

Open the battery compartment on the back of

the remote control.

Insert the batteries or replace the old batteries

with new ones. Only use batteries of the speci-

ﬁed type („Technical data“).

Note: When inserting the batteries, please

observe the correct polarity. This is indicated in

the battery compartment.

Close the battery compartment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 331472 VE 6035SCR in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 331472 VE 6035SCR Manual

Product: