750353

Silvercrest IAN 331446 SKMS 150 A1 Manual

16
Zoom out
Zoom in
Previous page
1/60
Next page
GB│IE │ 13 ■
SKMS 150 A1
Setup/initial start-up
1) Clean the appliance as described in the
chapter “Cleaning and Care”.
2) Place the appliance on a suitable and level
surface.
3) Unwind the cable from around the cable
retainer 5 and guide it through the recess on
the edge of the housing.
4) Insert the plug into a mains power socket.
The appliance is now ready for use.
Grinding coffee beans
forfilter coffee
1) Remove the lid 1 from the motor unit 2.
2) Fill with the required quantity of coffee beans.
NOTE
► Do not fill the appliance with more than 70g
of coffee beans. If you do so, the coffee beans
will not be ground properly. 70g corresponds
to around 8 tablespoons of coffee beans!
► You will require around 6 – 8g of ground
coffee for one cup of coffee. Please observe
the instructions in the operating manual of
your coffee machine.
3) Place the lid 1 on the motor unit 2 so that the
arrow ▼ on the lid 1 points towards the
symbol on the motor unit 2. Close the lid 1
by turning it clockwise until the arrow▼ points
to the symbol. The lid1 clicks into place.
4) Press and hold the switch 3 until the coffee
beans have been ground to your requirements
(around 30 seconds).
NOTE
► If, during grinding, coffee starts collecting on
the edge of the appliance where it is out of
the reach of the blade 4, shake the
appliance gently so that the coffee falls back
inside.
The coffee grinding grade is influenced by the
quantity of coffee beans added and the duration
of grinding.
The longer you grind the coffee, the finer the result.
Shorter grinding results in coarser ground coffee.
Grinding
grade
Recommended
quantity of
coffee
beans
Time in
seconds
Coarse 70 g (approx. 8 tbsp.) 30 s
Medium 45 g (approx. 5 tbsp.) 35 s
Fine 36 g (approx. 4 tbsp.) 45 s
These are rough guide values.
NOTE
► Please note the information about the grinding
grade in the operating manual of your coffee
machine.
5) Release the switch 3 once the coffee beans
have been ground to your requirements and
wait until the blade 4 has come to a standstill.
6) Unscrew the lid 1 until the arrow ▼ on the
lid1 points towards the symbol on the
motor unit 2 and remove it.
7) Remove the plug from the mains power socket.
You can now remove the ground coffee using a
spoon or similar. You can clear out any residue
using the cleaning brush 6.
Grinding espresso beans
for espresso
Ground coffee for espresso always requires very
fine grinding. Ensure that you grind the special
espresso beans for an appropriate time (approx.
45 seconds) when preparing espresso.
NOTE
► To reach the grinding grade needed for
espresso, we recommend grinding a maximum
of 36g of espresso beans (around 4 tbsp.) for
around 45seconds.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 331446 SKMS 150 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 331446 SKMS 150 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info