751719
19
Zoom out
Zoom in
Previous page
1/66
Next page
19 GB/IE
Q Weigh and add
The product allows you to weigh foods consecutively
without removing food already in the weighing
bowl 1.
Place the weighing bowl 1 on the product.
Press the ON / OFF button 2 to switch the
product on.
Select the unit of weight by pressing the unit of
weight button (UNIT) / Timer button 5 as
described in “Weighing” section.
Place the food you wish to weigh in the weigh-
ing bowl 1.
The LCD readout 4 indicates the weight of the
food in the selected unit of weight.
Now press the TARE button / Timer button
6.
The numerical display 9 will show zero read-
ing. The TARE symbol 13 will appear.
Now place more food in the weighing bowl 1.
The LCD readout 4 indicates the weight of
the food you have added in the selected unit
of weight.
Continue in this way only until the maximum ca-
pacity of the product is reached or the weighing
bowl 1 is full.
Q Remove part of the
weighed food
Place the weighing bowl 1 on the product.
Press the ON / OFF button 2 to switch the
product on.
Select the unit of weight by pressing the
unit of
weight button (UNIT) / Timer button 5 as
described in “Weighing” section.
Place the food you wish to weigh in the
weighing bowl 1.
The LCD readout 4 indicates the weight of the
food in the selected unit of weight.
Now press the TARE button / Timer button
6.
The numerical display
9
will show zero readi
ng.
The TARE symbol 13 will appear.
Now remove the required amount of food from
the weighing bowl 1.
The LCD readout 4 will show a negative value
indicated by the minus symbol 12 .
Now press the TARE button / Timer button
6.
The numerical
display
9
will
show zero reading
.
The TARE symbol
13 will disappear.
Q Set the countdown timer / alarm
The timer on the product has a time span of 00:10
to 99:50 minutes. The set time is counted down in
reverse to “00:00“. An alarm signal then sounds
and the alarm display 14 flashes.
Press the ON / OFF button 2 to switch the
product on.
Press the Timer button (T-SET) 3. The alarm
display 14 will appear.
Set the required time by pressing the unit of
weight button (UNIT) / Timer button 5 or
the TARE button / Timer button 6.
Press the Timer button (T-SET) 3 again to con-
firm the set time and to start the countdown timer.
Press the Timer button (T-SET) 3 again to stop
the countdown timer.
Press the Timer button (T-SET) 3 again to reset
the set time to “00:00“. The alarm display 14
will disappear.
Note: When the set time has elapsed, an ala
rm
signal sounds.
Press the ON / OFF button 2 to stop the alarm
and at the same time switch off the product.
Q Display ambient temperature
When the product is switched on, the LCD readout
4 shows the current ambient temperature. This is
indicated by the temperature display 10 in °C.
Q Switch off the product
The product switches itself off automatically after
90 seconds of inactivity to save energy.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 329288 HG05616A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 329288 HG05616A in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info