751815
24
Zoom out
Zoom in
Previous page
1/29
Next page
GB / IE / NI 103
Sewing basics
Monogramming and embroidering with embroidery hoop*
Stitch Stitch width stitch length
1~5 0
Attach the embroidery and darning
plate
1. Remove the presser foot and the
presser foot holder.
2. Attach the embroidery and darning plate
(o).
3. Lower the two-step presser foot lifter
(18) before starting to sew.
4. Adjust the stitch width according to the
size of lettering or design.
Preparation for monogramming and
embroidering*
1. Draw the desired lettering or design on
the right side of the fabric with the use
of a water-soluble fabric marker.
2. Stretch the fabric between the
embroidery hoop as rmly as possible.
3. Place the fabric under the needle.Lower
the two-step presser foot lifter (18).
4. Turn the hand wheel (21) towards you
to bring up the lower thread through the
fabric. Sew a few securing stitches at
the starting point.
5. Hold the hoop with thumb and
forengers of both hands.
6. Coordinate the sewing speed and the
movement of hoop.
* The embroidery hoop is not supplied with the
machine.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326967 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326967 in the language / languages: English as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 326967

Silvercrest IAN 326967 User Manual - German - 29 pages

Silvercrest IAN 326967 User Manual - Dutch - 29 pages

Silvercrest IAN 326967 User Manual - French - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info