751718
40
Zoom out
Zoom in
Previous page
1/154
Next page
SilverCrest SKR 800 D1
38 - English
8.14 Alarm
You can set two alarm times. For both alarm times, you can select a buzzer or the last radio station you
listened to. For Alarm 1 use the / MEM button [13] and for Alarm 2 the / AMS button [10]. Check
that the clock is displaying the correct time.
While switched off, press and hold the / MEM button [13] (Alarm 1) or the / AMS button [10]
(Alarm 2) for approx. 2 seconds.
The hour display flashes and you can now turn the TIMER button [5] to set the hour for the alarm.
Briefly press the / MEM button [13] or the / AMS button [10] to apply the setting.
The minute display flashes and you can now turn the TIMER button [5] to set the minutes for the alarm.
Briefly press the / MEM button [13] or the / AMS button [10] to apply the setting.
The indicator for the option selected flashes on the display [1]. Now you can turn the TIMER button
[5] to select the following options:
Option Function
OFF Disables the alarm
Enables the alarm with buzzer (alarm time 1)
Enables the alarm with buzzer (alarm time 2)
Enables the alarm with the last tuned-in radio station (alarm time 1)
Enables the alarm with the last tuned-in radio station (alarm time 2)
Briefly press the / MEM button [13] or the / AMS button [10] to apply the setting.
If the alarm is enabled, there is a / symbol [34] or
/
symbol [35] on the display [1].
The alarm buzzer starts quietly and gradually increases in volume. To disable the alarm
for 24 hours, briefly press the VOLUME button [14], or press the / MEM button [13]
or the / AMS button [10].
If you do not switch the buzzer off, it will switch off automatically after about 1 hour.
To snooze the alarm for about 9 minutes, briefly press the SNOOZE/SLEEP button [12].
While the SNOOZE function is active, depending on the set alarm, the / symbol
[34] or / symbol [35] flashes on the display [1].
8.15 Selecting Radio / AUX mode
When the device is powered on, keep the VOLUME knob [14] pressed for about 2 seconds to toggle
between Radio and AUX mode.
In Radio mode, the FM indicator [31] and the frequency [30] in MHz [29] are shown on the
display [1].
In AUX mode, the AUX indicator [30] is shown on the display [1].
When it is switched off, it switches back on to the last operating mode active
(Radio/AUX).
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326701 SKR 800 D1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326701 SKR 800 D1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info