751718
36
Zoom out
Zoom in
Previous page
1/154
Next page
SilverCrest SKR 800 D1
34 - English
The following tools are required for mounting:
Nails
Power drill
2 mm wood drill
Screwdriver
To mount the kitchen radio under a wall unit, proceed as follows:
Hold the mounting template [G] on a suitable place of installation under your wall cupboard.
Place a nail on each the markings of the mounting template [G] and make a small dent in the wall unit
material.
You can now remove the mounting template [G] from the wall unit.
Use a 2 mm wood drill to drill small holes where you made the little dents.
Push the mounting plate [17] backwards off the kitchen radio and remove it.
Now decide if you want to mount the kitchen radio with or without the spacers [C].
Mounting with spacers [C]: Place the spacers [C] between the wall unit and the mounting plate
[17]. Fix the mounting plate [17] using the long screws [D].
Mounting without spacers [C]: Fix the mounting plate [17] using the short screws [E].
Slide the top of the kitchen radio onto the mounting plate [17] until it clicks into place. Verify that the
device is safely securely fixed.
Lay out the wire antenna [18] and the power cable [19].
To dismount the kitchen radio, proceed as follows:
Pull the kitchen radio forwards off the mounting plate [17].
Remove the screws from the mounting plate [17] and detach the mounting plate [17] and, if used, the
spacers [C] from the wall unit.
7.4 Inserting the backup batteries
On the bottom of the kitchen radio, you will find the battery compartment [23] for the backup batteries.
Here, you can insert batteries (not supplied) so that you do not lose preset stations, alarm settings and
the time if there is a power cut.
To insert the backup batteries, proceed as follows:
Open the battery compartment [23] on the bottom of the kitchen radio by sliding the battery
compartment cover in the direction of the arrow and removing it.
Insert the batteries (2 AA-type batteries, not included) with the correct polarity (+ and -). The correct
polarity is marked on the batteries and inside the battery compartment [23].
Re-insert the cover of the battery compartment [23] and slide it in the opposite direction to the arrow
until it clicks into place.
CAUTION! Remove the batteries when the device is not to be used for an extended
period. The batteries could leak and damage the device.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326701 SKR 800 D1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326701 SKR 800 D1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info