752612

Silvercrest IAN 326320 SMWC 700 B1 Manual

30
Zoom out
Zoom in
Previous page
1/116
Next page
31 GB/IE
Setting the cooking time
¾After choosing the power level, use
12
to
set the desired cooking time:
Time setting
(Cooking time) Time increments
less than 5 minutes 10-second increments
from 5 to 10 minutes 30-second increments
from 10 to 60 minutes 1-minute increments
Starting the cooking process
Once you have set the power level and the cooking
time, you can start cooking:
¾Start cooking: Press
13
. Cooking begins. The
time is counted down.
¾When the set time has elapsed: End is shown in
the display 7. 3 beeps sound.
¾Press
14
or open the door 1. The
product switches to the standby mode. If you do
nothing, there will be a further 3 beeps every
3 minutes.
Pausing/cancelling the cooking
process
You can pause or stop cooking at any time:
¾Pause cooking: Press
14
. The
remaining time stops and flashes. The cooking
time is paused.
¾Resume cooking: Press
13
. The time is
counted down again.
¾Stop cooking: Press
14
again. The
time is shown in the display 7.
Quick start 1
This feature allows you to immediately cook for
1 minute (or longer, up to 60 minutes) with 100P
(700 W) power.
¾In standby mode: Press
13
. Cooking begins.
Time setting
(Defrost) Time increments
less than 5 minutes 10-second increments
from 5 to 10 minutes 30-second increments
from 10 to 60 minutes 1-minute increments
Quick start 2
This function is mainly intended for heating drinks in
cups (150 ml).
This feature allows you to start heating for 30, 60, or
90 seconds at 100P (700 W) power.
¾Press 9. 00:30 is shown in the display 7.
¾Press 9 again if you want to amend the
cooking time to 60 or 90 seconds.
¾Start the process: Press
13
. Cooking begins.
The time is counted down.
Setting the timer
¾Set the desired power level and cooking time
(see previous chapters).
¾Press and hold
11
for a few seconds.
The current time is shown. The hour display is
flashing.
¾Use
12
to set the hours.
Press
11
to confirm your selection.
¾The minute display is flashing. Use
12
to
set the minutes.
Press
11
to confirm your selection.
¾The input is confirmed with a long beep. The time
is shown in the display 7.
NOTES:
¾Press
11
. The programmed start time is
shown for a few seconds in the display 7.
¾If an automatic start time is set, the product can
not be started manually.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 326320 SMWC 700 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 326320 SMWC 700 B1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info