751808
22
Zoom out
Zoom in
Previous page
1/81
Next page
GB/IE24
Please note: The unit may produce a slight odour
for a short time when used for the first time.
Start up
Switching on/off
Make sure that the three heat level switches 2, 3
and 4 are set to “0”. Then connect the heater
to a grounded socket protected by a residual-
current device with overload protection. The heating
unit must be freely rotatable.
Now switch on the unit by switching the on/off
switch 4 to the “I” position. To turn off the unit,
switch the on/off switch 4 to the “0” position.
Please note: When the unit is switched on, the middle
heating element is activated.
Heating levels
The halogen heating unit has three different
heating levels: 400W, 800W and 1200W.
The first heating level (400W) is reached when
the unit is switched on. In the process, the central-
heating element is put into operation (see chapter
Switching on/off).
The second heating level (800W) is reached by
additionally switching one of the heating level
switches to on
(
2
or
3
)
.
Please note: The heating level switch
2
switches the
lower heating element on.
The heating level switch
3
switches the upper heating element on.
The third heating level
4
(1200W) is reached by
additionally switching both of the heating level switch-
es to on (
2
&
3
).
Oscillation
Set the oscillation switch
1 to “I” to activate the
function. The heater fan will begin to move from
side to side.
To disable the oscillation, switch the oscillation
switch
1 to “0”.
 Overheating protection
This unit is equipped with an overheating protection
device. If the unit is too hot, the heating element switches
off automatically. Turn the unit OFF by turning the
heating level switch to “0” and pull the power plug
out of the socket. Please note: If the overheating pro-
tection is triggered, you should turn OFF the unit and
contact the service hotline (see chapter “Service”).
Tip-over protection
This unit is equipped with a tip-over protection device.
This is located in the base of the unit. If the unit is
inadvertently knocked over or tilted heavily during
operation, it will switch off automatically. The unit is
only functional in an upright position.
Maintenance, Cleaning
and Storage
Always disconnect the power plug when the device
is not in use and before any cleaning or in the
event of operating faults!
Clean the device only when it is turned OFF and
in a cooled condition.
Ensure that no moisture penetrates into the device
in order to avoid irreparable damage.
Clean the housing with a soft dry cloth only.
Do not use aggressive and/or abrasive cleaning
agents.
Remove dust deposits from the protective grille
with a vacuum cleaner.
Store the device in a dry room.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 322112 SHH 1200 D2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 322112 SHH 1200 D2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info