751890

Silvercrest IAN 321938 SDBE 2600 B1 Manual

21
Zoom out
Zoom in
Previous page
1/75
Next page
22 GB/IE
Before first use
Remove the packaging. Check if all parts are
complete.
To remove any production or transport residue,
iron a simple scrap of fabric (e.g. a cloth or rag)
before first use.
NOTE: The product may give off some vapours
or odours during first use. These are production
or transport residue that will quickly subside.
There may also be quiet noises such as clicking
or crackling. These will also quickly subside
once the plastic parts have finally adjusted to the
operating conditions.
Operation
Setting the temperature
The arrow behind the temperature control
11
shows the current temperature setting.
Turn the temperature control
11
clockwise
from the lowest setting MIN to the desired
temperature level.
The temperature control
11
is divided in
3 ranges. They are general recommendations for
different types of fabric:
Symbol Setting
Low temperature
For synthetic fabrics (e.g. nylon)
Medium temperature
For sensitive fabrics (e.g. silk or wool)
High temperature
For tough fabrics (e.g. cotton or linen)
Highest temperature
For steam ironing
Ironing
mATTENTION! Before ironing, check the ironing
instructions on the fabric or article of clothing.
They are usually included on a sewn-on tag.
mATTENTION! Operate the product on an even
and solid surface.
1. Turn the temperature control
11
counter-clockwise
all the way to MIN.
2. Connect the power plug
8
with an appropriate
power outlet. The green operating light
7
on the
top of the handle lights up when the product is
connected to the power supply.
3. Make sure the power cord
8
is laid out safely.
4. Set the temperature control
11
to the desired
temperature.
As long as the product has not yet reached the
set temperature and is still heating up, the control
light
10
remains lit. Once the set temperature has
been reached, the control light
10
goes off.
5. Once the set temperature has been reached, you
can begin ironing.
Filling the water tank
mDANGER! Risk of electric shock! Always
disconnect the power plug
8
from the power
outlet before filling the water tank.
mATTENTION! Fill the water tank with tap water
or distilled water without any additives. If your
tap water is hard, use distilled water. Where the
water is moderately hard, mix distilled water and
tap water at a ratio of 1:1.
mATTENTION! Use the measuring cup
14
to fill
water into the water tank.
NOTE: The water tank has a filling capacity of
approximately 370 ml.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321938 SDBE 2600 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321938 SDBE 2600 B1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info