751847

Silvercrest IAN 321850 SHSS 16 A1 Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
SHSS 16 A1■ 8 │ GB│IE│NI│CY
Emptying the dirt container and
cleaning the filter
NOTE
► To achieve the best results, empty the dirt
container 8 and clean the HEPA filter 6
regularly.
► If you need a new HEPA filter 6, please
contact our service department (see section
“Ordering spare parts”).
1) To open the dirt container 8, remove the hand
element 4 from the hand element recess r.
2) Press the release button 5 and, at the same
time, pull the dirt container 8 forwards and
off.
3) Start by pulling the HEPA filter 6 and then the
coarse filter 7 out of the dirt container 8 (fig.
3). Tap out both parts over a rubbish bin or
similar. If necessary, you can rinse out the
HEPA filter 6 with fresh water. Allow it to air
dry fully afterwards.
Fig. 3
4) Empty the dirt container 8 into the rubbish bin
or similar.
5) First re-insert the coarse filter 7 and then the
dry HEPA filter 6.
6) Replace the dirt container 8 onto the hand
element 4 by first pushing the lower catch on
the hand element 4 into the recess on the dirt
container 8. Then, press the upper part of the
dirt container 8 onto the hand element 4
until the dirt container 8 clicks into place and
sits firmly.
Cleaning the appliance
Wipe the appliance with a damp cloth. For
stubborn dirt, add a little mild detergent to the
cloth. Ensure that the appliance is completely dry
before the next use.
Cleaning the rotary brush
The rotary brush t should be checked regularly
for blockages, and any hairs, threads or dirt should
be removed. Remove the rotary brush t as
follows:
1) Turn the floor nozzle upside down.
2) Push the catch on the cover plate towards the
symbol so that you can remove the cover
plate (fig. 4).
3) Lift out the rotary brush t.
4) Remove dirt (on both sides of the bristles) and
clean the rotary brush t. To do this, take a
damp cloth and wipe the individual bristle
bundles from the inside to the outside.
WARNING! RISK OF INJURY!
► Be careful when handling the knife h.
The blade is very sharp!
NOTE
► You can use the knife h to remove stuck hair
and threads:
–Fold the blade of the knife h carefully out of
the handle and cut stuck hair and threads.
–Fold the blade back in. When doing so, only
touch the blunt edge of the blade! Risk of
injury!
–Remove the cut hairs and threads from the
rotary brush t.
… 11 …


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-ian-321850-shss-16-a1

Reset search

  • The knurled plastic protrusion that drives the rotary brush is jammed with hair or cotton, how do I get it out. Submitted on 23-5-2023 at 18:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321850 SHSS 16 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321850 SHSS 16 A1 in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 321850 SHSS 16 A1

Silvercrest IAN 321850 SHSS 16 A1 User Manual - German - 40 pages

Silvercrest IAN 321850 SHSS 16 A1 User Manual - Dutch, Danish - 52 pages

Silvercrest IAN 321850 SHSS 16 A1 User Manual - French, Italian - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info