751893

Silvercrest IAN 321540 SFW 350 D2 Manual

31
Zoom out
Zoom in
Previous page
1/144
Next page
■ 28 │ GB│IE SFW 350 D2
Assembling the kubbe attachment
Unfold the fold-out side. There you will find the step-by-step illustrations for
assembling the appliance.
1) Remove the meat grinder casing 6 as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing 6.
NOTICE
► To use the kubbe attachment r, neither the cross blade 9with the spring 8,
nor a cutting or sausage disc 0/eare required! Remove these from the
meat grinder casing 6 if necessary.
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment r so that the fixings on
the bottom kubbe attachment r ring are located in the openings in the meat
grinder casing 6.
5) When everything has been attached correctly, screw the ring clamp q back
on hand-tight.
6) Assemble the meat grinder casing 6 as described under “Assembling the
meat grinder”.
Assembling the biscuit attachments
Unfold the fold-out side. There you will find the step-by-step illustrations for
assembling the appliance.
1) Remove the meat grinder casing 6 as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing 6.
NOTICE
► To use the biscuit attachment 1, neither the cross blade 9 with the spring 8,
nor a cutting or sausage disc 0/e are required! Remove these from the
meat grinder casing 6 if necessary.
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips 1 away from the front of the biscuit attachment 1.
5) First place the plastic disc and then the metal disc of the biscuit attachment 1
into the meat grinder casing 6 (see fold-out side). Insert the biscuit
attachment 1. so that the fixings on the biscuit attachment 1. are located in
the openings in the meat grinder casing 6.
6) After everything has been correctly assembled, screw the ring clamp q
back on hand-tight.
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 321540 SFW 350 D2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 321540 SFW 350 D2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info