752546

Silvercrest IAN 317306 SGWI 180 Manual

18
Zoom out
Zoom in
Previous page
1/61
Next page
18 GB/IE
Cleaning and care / Disposal / Warranty / ServiceSet-up / Operation / Troubleshooting
Inserting / Replacing Batteries
Note: the batteries must be inserted prior to initial
use. First, remove the insulating strips from the battery
compartment 3.
Note: if the scales do not respond, remove and
reinsert the batteries.
Open the battery compartment cover 3.
Insert the three included batteries (with the cor-
rect polarity) in the battery compartment 3.
Please note the markings inside the battery
compartment 3.
Close the battery compartment cover 3 until
you hear it click into place.
Positioning the scales
Place the scales on a stable, level
surface. A solid floor covering is re-
quired in order to achieve correct
weight measurements.
Adjusting the unit of weight
The factory default setting for the scales as supplied
is „kg”. If you wish to switch to „lb“ or „st“, press
the UNIT button 4 on the back of the scales as
many times as required.
Operation
Tip: if possible, always weigh yourself at the same
time of day (preferably in the morning) after visiting
the toilet, with an empty stomach and without clothing
to ensure that your results are comparable.
Note: if the location or the batteries are changed,
the scales must be re-calibrated. To re-calibrate, do
the following: step onto the scales quickly. Step off
the platform 1. The scales will be calibrated auto-
matically. Wait until the scales switch off automati-
cally. The scales are now calibrated and you can
weigh yourself.
Measurements
Step onto the scales barefoot and be sure to
stand still on the platform 1 with the weight
distributed equally between both legs.
Note: if possible, stand on the same area of
the platform 1 each time and do not move.
Moving during the weighing process can lead
to discrepancies in the results.
The scales will start to measure immediately.
The weight display in the LED display 2 will
blink before showing the result.
Step off the platform 1. The measurement
value in the LED display 2 will disappear after
about 10 seconds. Until then the weight meas-
urement remains visible.
Turning off the scales
The scales feature an automatic shut-off function
and will automatically switch off after displaying
the results.
Troubleshooting
= Error / Display
= Cause
= Solution
= The LED display 2 reads “Lo“.
= The batteries in the scales are dead.
= Replace the batteries.
= The LED display 2 reads “Err“.
= The maximum load capacity of 180 kg /
396 lb / 28 st has been exceeded.
= Do not exceed 180 kg / 396 lb / 28 st.
= “Err“ or incorrect weight is displayed.
= The surface is not level or stable.
= Place the scales on a level, stable surface.
= You are not standing still.
= Stand as still as possible.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 317306 SGWI 180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 317306 SGWI 180 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info