752551
18
Zoom out
Zoom in
Previous page
1/74
Next page
16 GB
~Never switch on the device at the same
time as there is another device with a
high power consumption attached to the
same multi-socket power strip.
~Do not use an extension cable.
DANGER! Risk of injury
through burning
~Do not direct the flow of hot air into
eyes, onto hands, or onto any other
heat-sensitive body parts.
~Do not touch the hot surfaces of the de-
vice.
~Allow the device to cool down com-
pletely before you clean it or put it
away.
~Allow all attachments to cool down be-
fore removing it from the device.
WARNING! Risk of material damage
~Only use the original accessories.
~Never place the device on hot surfaces
(e.g. hob plates) or near heat sources or
open fire.
~Do not use any astringent or abrasive
cleaning agents.
~Do not expose the device to tempera-
tures below -10 °C or above +40 °C.
4. Items supplied
1 hair dryer|4
1 styling attachment|2
1 diffuser|1
1 set of operating instructions
5. Operation
NOTE: before using it for the first time,
switch the device on for a few minutes and
allow it to run at the highest speed and high-
est temperature setting. As a result of the
manufacturing process, you may notice a
slight odour. This is normal and only occurs
during first use. Ensure that the room is well
ventilated.
Switching on/off and adjusting
speed
1. Connect the mains plug|9 with an easi-
ly accessible wall socket.
2. Using the on/off switch|11 and the
switch for the speed settings, you can
switch the device on and select the de-
sired speed for the air flow:
z= off
= slow; gentle air flow
= fast; strong air flow
3. After drying, switch the on/off
switch|11 to z (off) and pull out the
mains plug|9.
Selecting the temperature setting
Use the switch for the hot air settings|12 to
select the desired temperature for the air
flow: = low temperature
= medium temperature
=high temperature
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 317026 SHIP 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 317026 SHIP 2000 B2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info