Manual Silvercrest IAN 314863 SSMC 600 B1 (page 10 of 58) (English)

752583

Zoom out

Zoom in

1/58

GB│IE│NI│CY │ 7 ■SSMC 600 B1

Operation

WARNING!

► The motor switches oﬀ automatically as soon as the blender 3 is removed

from the motor block 6 or the lid 2 is opened. In such cases it may be

easy to forget that the machine is still switched on. The motor will then start

unexpectedly as soon as the blender attachment 3 is ﬁtted or the lid 2 is

closed again:

Therefore:

–Do not insert the power plug into the wall socket until the blender 3 is

ﬁlled and mounted with its lid ﬁtted and closed.

–Before ﬁtting the blender, always check to see that the appliance is

switched oﬀ or that the power plug has been removed.

–Switch the appliance oﬀ ﬁrst, pull the plug out and wait until the motor has

come to a standstill before removing the blender 3 or opening the lid 2.

Fitting and ﬁlling the blender

1) Remove the blender 3 from the motor block 6 in a vertical, upward motion.

2) Remove the lid 2 by rotating it anticlockwise towards position (see Fig 1)

until you can pull it upwards.

3) Fill the blender 3.

4) Press the lid 2 ﬁrmly down onto the blender 3. Close the lid 2 by turning

it clockwise to position until it audibly engages (see Fig. 2). Ensure that

the pouring spout on the blender 3 is closed. The motor cannot start until

the lid2 is ﬁtted ﬂush.

Fig. 1 Fig. 2

5) Press the measuring cap 1 into the lid as far as the stop.

6) Place the completely ﬁlled and closed blender 3 with the handle to the

right on the motor block 6. Make sure that the arrow q on the blender 3

points to the  arrow on the motor block 6. Turn the blender 3 slightly

back and forth if it does not immediately sit properly. The motor cannot start

until the blender 3 is ﬁtted ﬂush to the motor unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 314863 SSMC 600 B1 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 314863 SSMC 600 B1

Silvercrest IAN 314863 SSMC 600 B1 User Manual - German, Dutch, Danish, French - 76 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 314863 SSMC 600 B1 Manual

Product: