752591

Silvercrest IAN 314663 SDA 350 A2 Manual

30
Zoom out
Zoom in
Previous page
1/116
Next page
28 GB
3. Put the food dehydrator trays|3 and the
top food dehydrator tray|2 on the de-
vice.
4. Mount the lid|1.
8.2 Make settings and start
the food dehydration
process
NOTE: for reference values of the drying
temperature, the drying time and the dehy-
dration test, please refer to chapter "Food ta-
bles" on page 25.
1. Insert the mains plug|4 into a wall sock-
et corresponding to the specifications of
the rating plate. On the display|13 00
flashes and Hr is shown.
2. Using the buttons —|15 and +|16 set
the drying time between 1 and 48
hours (01 Hr to 48 Hr) in 1-hour incre-
ments.
3. Briefly press the button |14 once to
switch to the temperature setting. On the
display 55 flashes and °C is shown.
4. In order to change the unit of the tem-
perature between °C and °F, keep the
button |14 pressed.
5. Using the buttons —|15 and +|16 to
set the drying temperature between
40 °C and 70 °C (or between 100 °F
and 160 °F) in 5°-increments.
6.
Briefly press the button |
17
once
to
start the food dehydration process.
The fan|9 starts. On the display|13, the
clock symbol is shown, indicating al-
ternatively the set temperature and the
remaining drying time. The drying time
is shown in hours (Hr), within the last
hour in minutes (Min).
7. Once the time set has elapsed, the de-
vice switches off. The fan|9 stops. On
the display|13 00 is shown steadily.
8. Check the dehydrated food applying
the dehydration test (see “Food tables”
on page 25). If the dehydrated food
has not yet been dried sufficiently, start
the food dehydration process again for
another shorter drying time.
9. Once the time set has elapsed, the de-
vice switches off. The fan|9 stops. For a
brief time, an audio signal will sound
and the display|13 will show 00 contin-
uously.
10.After the completion of the food dehy-
dration process, disconnect the mains
plug|4.
8.3 Changing the setting
during the food
dehydration process
During the dehydration process, you can
change the setting of drying time and drying
temperature at any time.
1. Press the button |14 briefly. The re-
maining time flashes on the display|13.
2. As long as the value on the display|13
flashes (approx. 2 seconds), you are
able to change it by pressing the but-
tons —|15 and +|16 .
NOTE: even if the remaining time has been
shown in minutes during the past hour, the
drying time can only be changed in hourly
increments.
3.
Briefly press the button |
14
once
to
switch to the temperature setting. As
long as the value on the display flashes
(approx. 2 seconds), you can change
the temperature setting by pressing the
buttons —|15 and +|16 .
4. After approx. 2 seconds, the values will
be stored and shown steadily.
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 314663 SDA 350 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 314663 SDA 350 A2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info