752591

Silvercrest IAN 314663 SDA 350 A2 Manual

25
Zoom out
Zoom in
Previous page
1/116
Next page
23
GB
4. Items supplied
1Base unit|8
4 Food dehydrator trays|3
1 Top food dehydrator tray|2
1Lid|1
1 Copy of the user instructions
5. How to use
FIRE HAZARD!
~Place the device on a dry, level, non-slip
and heat-resistant surface.
~The device must not be operated close
to flammable liquids or materials, or in
a potentially explosive environment.
Keep at a distance of at least 30 cm
from walls.
~In order to prevent an overheating of
the device, do not cover the device and
do not cover the ventilation slots|6 on
the underside of the device.
NOTE: when in operation for the first time,
some odour may be generated by the de-
vice. This is not a product defect. Therefore,
prior to the initial food dehydration process,
you should clean the device, operate it in an
empty state according to the following in-
structions, and then clean it again. Here, en-
sure adequate ventilation.
• Remove all packing material.
• Check to ensure that all parts are pres-
ent and undamaged.
•Clean the device prior to its first
use! (see “Cleaning” on page 29)
1. Place the base unit|8 on a dry, level,
non-slip surface.
2. Put the food dehydrator trays|3 and the
top food dehydrator tray|2 on the de-
vice.
3. Mount the lid|1.
4. Insert the mains plug|4 into a wall sock-
et corresponding to the specifications of
the rating plate. On the display|13 00
flashes and Hr is shown.
5. Using the buttons —|15 and +|16 set
the drying time to 1 hour (01 Hr).
6. Briefly press the button |14 once.
On the display 55 flashes and °C is
shown.
7. Using the buttons —|15 and +|16 set
the drying temperature to 70 °C.
8.
Briefly press the button |
17
once
to
start the device.
9. Once the time set has elapsed, the de-
vice switches off. The fan|9 stops. For a
brief time, an audio signal will sound
and the display|13 will show 00 contin-
uously.
NOTE: you can cancel the initial heating up
process after just 30 minutes by keeping
the
button |
17
pressed until t
he fan|9 stops
and the display|13 permanently shows 00.
10.Pull out the mains plug|4.
11.Allow the device to cool down.
12.Clean the device again (see “Cleaning”
on page 29).
6. Food dehydration
6.1 General information on
the food dehydration
process
Food dehydration is a preservation process.
It is based on the extraction of water from
food. A low water content deprives bacteria
and mildew of their fundamental living con-
ditions. The dehydration process occurs at
relatively low temperatures (40 - 70 °C).
There is no need to add chemical additives,
salt or sugar. Thus, the food remains untreat-
ed. The major part of the vitamins remains
intact. The drying process causes a concen-
tration of minerals, fibres and nutrients.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 314663 SDA 350 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 314663 SDA 350 A2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info