752602

Silvercrest IAN 314615 SKM 600 A1 Manual

20
Zoom out
Zoom in
Previous page
1/88
Next page
GB│IE │ 17 ■
SKM 600 A1
Preparations
1) Take all the parts out of the box and remove
the packaging material and any protective
wrapping or stickers.
2) Clean all components as described in the
section “Cleaning and care”. Ensure that all
parts are completely dry.
3) Place the appliance on a clean and level
surface and attach it firmly in place with the
suction cups.
4) Insert the power plug into the mains socket.
Speed settings
Level Use suitable for...
1 – 3
Kneading
hook 0
Beater w
- Kneading and mixing
of firm dough or
firmer ingredients
3 – 5 Beater w
- Mixing thick cake
mixture
- Mixing butter and
flour
- Mixing yeast dough
- Mixing shortcrust
pastry
3 – 4 Kneading
hook 0
- Kneading yeast
dough
- Kneading thick cake
mixture
5 – 7 Beater w
- Cake mix
- Whisking butter with
sugar
- Biscuit dough
7 – 8 Whisk q
- Whipped cream
- Egg white
- Mayonnaise
- Whisking butter until
fluffy
Working with the kneading
hook, beater and whisk
WARNING! RISK OF INJURY!
► Never place your hands or fingers in the
mixing bowl 6 during operation! Danger
of injury due to rotating parts!
► Do not change accessories unless the drive is at
a complete standstill! After being switched off,
the drive unit will continue to run for a short time.
► In cases of malfunction, switch the appliance
off and remove the plug from the wall socket
to prevent the appliance from being switched
back on unintentionally.
ATTENTION! PROPERTY DAMAGE!
► When working with the kneading hook 0,
whisk q or beater w we recommend allowing
the appliance to cool down after 10 minutes of
operation.
Please proceed as follows to prepare the appli-
ance for operation with the kneading hook 0,
whisk q or beater w:
1) Press the release button 2 . The swivel
arm 1 moves upwards.
2) Insert the mixing bowl 6 in such a way that
the locking tabs on the mixing bowl 6 grip
into the recesses in the base 5. Turn the
mixing bowl 6 clockwise (see and
symbols on the base 5) so that it is locked
and firmly held in place.
3) Select the appropriate attachment 0 q w:
–The whisk q for whipping cream.
–The beater w for stirring cake mixture.
–The kneading hook 0 for kneading heavy
dough such as yeast dough.
4) Depending on what you want to do, attach
the kneading hook 0, whisk q or beater w
to the drive shaft 7:
–Fit the kneading hook 0, whisk q or
beater w (referred to in the following as
“the attachment”) to the drive shaft 7 in
such a way that the two metal pins on the
drive shaft 7 engage in the recesses of the
attachment 0 q w.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 314615 SKM 600 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 314615 SKM 600 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info