Manual Silvercrest IAN 313831 STV 30 A1 (page 26 of 102) (English, German, Dutch, French, Polish, Swedish)

753868

Zoom out

Zoom in

1/102

SilverCrest STV 30 A1

24 – English

7. Before initial use

7.1 Unpacking

 Take the product out of the packaging.

 Completely remove all packaging materials.

 Check the package contents for completeness. Contact Service immediately in case of

missing components.

7.2 Assembly

 Insert the base (10) into the motor unit (8). Now fasten the base to the motor unit using the

four screws provided (11).

 Screw the protective grille nut (5) anti-clockwise from the motor unit (8).

 Attach the rear protective grille (6) to the motor unit (8). To do this, push the two narrow slots

on the rear protective grille (6) onto the studs on the motor unit (8). Make sure that the

handle (7) on the rear protective grille (6) is pointing upwards.

 Fasten the rear protective grille (6) to the motor unit (8) using the protective grille nut (5). To

do this, tighten the protective grille nut (5) clockwise.

 Remove the thread cover from the drive shaft of the motor unit (8). Then attach the rotor

blade (4) to the motor unit (8). Ensure that the recess on the rotor blade (4) holds the prong

of the motor unit drive shaft (8).

 Fasten the rotor blade (4) to the motor unit (8) using the rotor blade nut (3). To do this,

tighten the rotor blade nut (3) anti-clockwise.

 Remove the nut (13) and the screw (14) from the front protective grille (1).

 Hang the front protective grille (1) on the rear protective grille (6). Make sure the hole in the

front protective grille (1) lines up with the hole in the rear protective grille (6).

 Push the screw provided (14) through the holes in the front (1) and rear (6) protective grilles

and fasten this in place using the nut (13). Then close the hinges (2) on the front protective

grille (1) so that they clasp the edge of the rear protective grille (6).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 313831 STV 30 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 3,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 313831 STV 30 A1 Manual

Product: