751713

Silvercrest IAN 312119 HG05706A Manual

19
Zoom out
Zoom in
Previous page
1/64
Next page
19 GB/IE
possible to activate the product. You can always
press the button TARE 3 at any time to set the
zero point.
Place the item you wish to weigh onto the product.
The numerical display 7 will show the weight of
the item you are weighing.
Incremental weighing
Touching the button TARE 3 with the product on
will change the numerical display 7 from the
reading to “0“. The “T“ symbol 10 will appear.
Note: A slight touch of the button TARE
3
and the
button UNIT 4 is sufficient to operate the product.
If there is too much pressure, the product may
cause tilting.
Now add another item to weigh onto the product.
The numerical display 7 will show the weight of
the newly added item.
If you remove the item added to the product, the
numerical display 7 will again read “0“.
If you remove all items from the product, the LC
display 2 will show a negative value indicated
by the minus symbol 9.
Then briefly touch the button TARE 3, and the “T“
symbol 10 will disappear.
Important! Be sure never to add more than 5 kg
to the weighing surface
1
. Overloading the product
can damage it.
Changing the measuring unit
The product will display the weight in the official Euro-
pean measuring unit “g“ (grams), as well as the tradi-
tional unit of weight “oz“ (ounce, 1 oz ≈ 28.35 g) or
“lb’oz“ (pound: ounce, 1lb = 16 oz ≈ 453.59 g).
When measuring the volume of water, the product
calculates it by the weight using the official European
unit of volume “ml“ (millilitres) or the traditional unit of
measure fl’oz (fluid ounces, 1fl’oz ≈ 28.41 ml).
To switch the unit of measure, briefly touch the UNIT
button 4. After each time it is touched, the unit
display 8 will switch to the next unit listed:
g → oz → lb’oz → ml → fl’oz
Switching off
Holding the button TARE 3 for approx. 3 seconds
will off the product. If no movement is detected on
the weighing surface 1 for 3 minute and no but-
ton is pressed, the product will automatically
switch off.
Troubleshooting
= Fault
= Cause
= Solution
=
= The product is overloaded.
= Remove the overload.
=
= The batteries are too weak to weigh. You cannot
operate the product.
= Replace the battery (see section “Replacing the
battery”).
Note: The product contains sensitive electronic compo-
nents. For this reason it is possible that it can be disr
upted
by radio transmitting equipment in the immediate vicinity.
If the LC display 2 indicates a problem, move such
objects away from it.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 312119 HG05706A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 312119 HG05706A in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info