753998
31
Zoom out
Zoom in
Previous page
1/130
Next page
28GBIE SDM 1500 D2
Operation
CAUTION! PROPERTY DAMAGE!
If you are not sure whether the floor is suitable for cleaning, please carry
out a tolerance test using a concealed part of the floor.
Always comply with the cleaning instructions of the carpet manufacturer.
Before cleaning, check also whether the carpet is suitable for steam
cleaning.
Never use the appliance without a pad 6/o on the steam foot 5.
Otherwise the floor could get scratched!
Never operate the appliance without water in the water tank 8!
The pump could overheat and be damaged!
NOTE
Before you clean the floor with the steam mop, we recommend that you
vacuum the floor to remove any loose particles of dirt.
Once the appliance is assembled and filled with water:
1) Flip the handle upwards so that the “Handle” release button 1 clicks into
place.
2) If not already done: Completely unwind the power cable from the cable
hooks z/i. To facilitate the unwinding of the cable, you can flip down the
upper cable hook z by pulling it out a little and turning it at the same time.
3) Run the cable through the notch t on the rear of the handle so that the
cable does not hang down into the working area.
4) Insert the plug into the mains power socket.
5) Set the on/off switch u to “I”. The on/off switch u lights up, the red
POWER control lamp 0 flashes. As soon as the appliance has warmed up
(after approx. 25 seconds), the red POWER control lamp 0 lights up
continuously.
6) Use the MODE button e to select the desired level of steam generation:
Press 1 x: low steam level, green control lamp w lights up.
Press 2 x: high steam level, red control lamp q lights up.
Press 3 x: no steam, standby, POWER control lamp 0 lights up.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 312077 SDM 1500 D2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 312077 SDM 1500 D2 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info