753848

Silvercrest IAN 311080 HG04770D Manual

17
Zoom out
Zoom in
Previous page
1/59
Next page
17 GB/IE
Clean the contacts on the battery /
rechargeable battery and in the bat-
tery compartment before inserting!
Remove exhausted batteries /
rechargeable batteries from the
product immediately.
Before first use (Fig. C)
Remove all packaging materials from the product.
Turn the product over and place it on a soft under-
lay to avoid scratching the surface. Loosen the
screw 6 located at the cover of the battery com-
partment 5 on the back of the product.
Open the cover of the battery compartment 5
on the back of the product.
Pull out the insulation strip from the battery
compartment 5.
Close the cover of the battery compartment 5
and tighten the screw 6.
Replacing the battery (Fig. C)
Turn the product over and place it on a soft underlay
to avoid scratching the surface. Loosen the screw 6
located at the cover of the battery compartment 5
on the back of the product.
Open the cover of the battery compartment 5
on the back of the product.
Remove the used battery, if present.
Insert a battery type CR2032 in the battery
compartment 5.
Note: Make sure you insert the batteries with the
correct polarity. This is indicated on the cover of
the battery compartment 5.
Close the cover of the battery compartment 5
and tighten the screw 6.
Operation
Set the product on a solid, level and flat surface to
weigh.
Weighing
Note: Always place the object you wish to weigh
gently onto the weighing surface 1 to avoid damag-
ing the glass surface.
Briefly touch the button / TARE 3 to switch on
the product. The LC display 2 will show all dis-
plays for approx. 3 seconds.
Note: A slight touch of the button / TARE 3
and the button UNIT 4 is sufficient to operate the
product. If there is too much pressure, the
product may cause tilting.
During this time the weighing equipment on the
product is adjusting. Afterwards the numerical
display 7 will read „0“. The unit display 8 will
show the last unit selected.
Note: if an object (e.g. a key) is already on the
weighing surface 1 while switching on, the
numerical display 7 will still read „0“.
Place the item you wish to weigh onto the product.
The numerical display 7 will show the weight of
the item you are weighing.
Incremental weighing
Touching the button / TARE 3 with the product
on will change the numerical display 7 from the
reading to „0“. The „Tare“ symbol 10 will appear.
Now add another item to weigh onto the product.
The numerical display 7 will show the weight of
the newly added item.
If you remove the item added to the product, the
numerical display 7 will again read „0“.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 311080 HG04770D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 311080 HG04770D in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info