753870
22
Zoom out
Zoom in
Previous page
1/105
Next page
20 GB
~Ensure that the power cable cannot be
trapped or crushed.
~To pull the mains plug out of the wall
socket, always pull on the mains plug,
and never on the power cable.
~Disconnect the mains plug from the wall
socket …
after every use,
if there is a fault,
when you are not using the device,
before you clean the device and
during thunderstorms.
DANGER - Fire hazard
~Never leave the device unattended
while it is plugged in.
~Use the device on a stable, level and
heat-resistant surface.
~Never cover the device when connect-
ed due to possible overheating and fire
hazard!
~Do not use the device in the vicinity of
flammable materials or flammable gas-
es.
DANGER! Risk of injury
through burning
~The welding wire becomes very hot dur-
ing operation. Do not touch the hot
welding wire.
~Allow the device to cool down com-
pletely before you clean it or put it
away.
DANGER! Risk of injury
~Ensure that you never vacuum your skin,
hair or clothing with the adapters.
DANGER caused by
insufficient hygiene
~For a carefree enjoyment of your vacu-
um-sealed food, you should always
comply with the following hygiene tips:
- During the preparation and packag-
ing of the food make sure that the en-
tire equipment is perfectly clean.
- Clean the vacuum sealer and all de-
vices thoroughly after use.
- Perishable food should be cooled or
frozen immediately after sealing.
- After thawing or heating perishable
food, this must be consumed immedi-
ately.
WARNING! Risk of material damage
~After the sealing and/or vacuuming
process, the device needs to cool down
for at least 80 seconds.
~Only use special plastic film bags that
are suitable for use with vacuum sealers
/ bag sealers.
~Never place the device on hot surfaces
(e.g. hot plates) or near to heat sources
or open fire.
~Ensure that no liquid is sucked in during
the extraction of air.
~The device is fitted with non-slip silicon
feet. Because furniture can be coated
with a wide variety of varnishes and
plastics, and treated with various care
products, the possibility cannot be ex-
cluded that some of these substances
have components that may attack and
soften the silicon feet. If necessary,
place a non-slip mat under the device.
~Do not use any sharp or abrasive clean-
ing agents.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 310996 SV 125 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 310996 SV 125 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info