753862
31
Zoom out
Zoom in
Previous page
1/118
Next page
SSSE 300 A1
28 GBIE
Storage
To save space when storing the appliance and its accessories:
Clean all parts as described in the section Cleaning.
Wind the power cable around the cable retainer 8 on the underside of the
motor unit 6 and guide the end of the cable through the notch on the edge.
Stack the cutting inserts 3 4 5 in the collector 7 and place this under the
opening of the motor unit 6.
Place the feed tube 2 with the chute first into the opening of the motor unit
6.
Place the pusher 1 into the feed tube 2.
Store the appliance in a dust-free and dry location
.
Troubleshooting
PROBLEM POSSIBLE CAUSE POSSIBLE SOLU-
TION
The appliance is not
working.
The appliance is not
connected to a mains
power socket.
Connect the appliance to
a mains power socket.
The mains power
socket is defective. Try a different wall socket.
The appliance is
defective.
Contact the Customer Ser-
vice department.
The feed tube 2 is
not correctly fitted.
Switch off the appliance
and check whether the feed
tube 2 has been turned
anticlockwise as far as the
stop.
The cutting insert 3 4 5 
rotates only with difficulty
or not at all.
The cutting insert 3 4 5  
is blocked by an obstacle.
Switch off the appliance,
disconnect the mains plug
and check whether there
is an obstacle in the feed
tube 2.
The feed tube 2  
is not correctly fitted.
Switch off the appliance
and check whether the feed
tube 2 has been turned
anticlockwise as far as the
stop.
If the malfunction cannot be corrected using one of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 309650 SSSE 300 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 309650 SSSE 300 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info