755697
32
Zoom out
Zoom in
Previous page
1/129
Next page
30 GB
Mounting the lid
NOTES:
For safety reasons, the blending process
will only start when the lid|2 is correctly
mounted.
To make it a little easier to close the
lid|2, place a few drops of cooking oil
onto a cloth and rub it over the seal|4.
4. Place the lid|2 slightly distorted onto the
blender jug|5.
5. Rotate the lid|2 clockwise until it stops.
The device is now fully assembled. On work-
ing with the device: see “Basic operation”
on page 30.
9. Basic operation
9.1 Power supply
1. Assemble the device for the desired
function.
2. Check that the speed control|11 is set
to 0 (off).
3. Plug the mains plug|13 into a suitable
wall socket. The wall socket must contin-
ue to be easily accessible after the de-
vice is plugged in.
4. Pull out the mains plug before cleaning
the device.
9.2 Switching the device on/
off and selecting speed
WARNING! Risk of material damage!
~The mixing mechanism must not be op-
erated continuously for longer than
10 minutes, or the blender for longer
than 3 minutes. You must then allow the
device to cool down to room tempera-
ture.
NOTE: the device only works when either
the cover|8 is mounted (for the mixing tools)
or the lid|2 is correctly mounted on the
blender jug|5.
1. Switch the device on by turning the
speed control|11 to the right.
2. Start at a slightly lower speed, and
slowly increase to the desired speed
(see “Overview of functions” on
page 27).
3. Reduce the speed to setting 1 - 2 when
you are adding ingredients during oper-
ation through the filling opening|20 or
the refill opening|3.
4. Set the speed control|11 to 0 to switch
the device off.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 307876 SKMP 1300 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 307876 SKMP 1300 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info