Manual Silvercrest IAN 307876 SKMP 1300 C2 (page 27 of 129) (English, German, Dutch, French, Portuguese, Spanish)

755697

Zoom out

Zoom in

1/129

~When using the device, ensure that the

power cable cannot be trapped or

crushed.

~When removing the mains plug from the

wall socket, always pull the plug and

never the cable.

~Disconnect the mains plug from the wall

socket…

… if there is a fault,

… when you are not using the food pro-

cessor,

… prior to assembling or disassembling

the food processor,

… prior to cleaning the food processor

… during thunderstorms.

~Do not use the device if there is visible

damage to the device, accessories or

power cable.

~To avoid any risk, do not make modifi-

cations to the product.

DANGER! Risk of injury

from cutting

~Never reach into the rotating blades. Do

not touch rotating parts with spoons or

similar utensils. Keep long hair or loose

clothing away from rotating parts as

well.

Please remember that the blades contin-

ue to turn for a short time after switching

off the device.

DANGER from rotating

parts

~Do not touch rotating parts with spoons

or similar utensils. Keep long hair or

loose clothing away from rotating parts

as well.

~Always ensure that the speed control is

set to 0 before you plug the mains plug

into the wall socket.

Switch the device off and pull out the

mains plug from the wall socket before

you exchange auxiliary or additional

equipment moving in operation.

When the blender jug is not attached, the

cover must be mounted. Otherwise the

device will not work, in order to avoid in-

juries.

WARNING! Risk of material

damage

~Place the device exclusively on a level,

dry, non-slip and waterproof surface, so

that it can neither fall nor slip off.

~The mixing mechanism must not be op-

erated continuously for longer than

10 minutes, or the blender for longer

than 3 minutes. You must then allow the

device to cool down to room tempera-

ture.

~The device must never be operated with-

out the jug.

~Never place the device on a hot sur-

face, e.g. hot plate.

~Do not change the position of the de-

vice, as long as there is still food or

dough in the device.

~Never overfill the blender jug or mixing

bowl, since otherwise the contents could

be ejected. Overflowing liquid would

flow onto the surface. You should there-

fore place the device on a waterproof

surface.

~Do not operate the device when it is

empty, as this causes the motor to over-

heat and may result in it being dam-

aged.

~Never fill the blender jug with hot or

boiling material.

Only use the original accessories.

~Do not use any astringent or abrasive

cleaning agents.

~The device is equipped with non-slip

plastic suction feet. As furniture is coat-

ed with a wide array of varnishes and

plastics, and is also treated with differ-

ent care products, it cannot be fully

ruled out that some of these materials

contain ingredients that could attack

and soften the non-slip plastic suction

feet. If necessary, place a non-slip mat

under the device.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 307876 SKMP 1300 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 307876 SKMP 1300 C2 Manual

Product: