Manual Silvercrest IAN 303937 - IP44 (page 14 of 73) (English, German, Dutch, French)

733460

Zoom out

Zoom in

1/73

14 GB/IE/NI

Setting up / Setting-up operationSetting up

rating (classiﬁcation IPX4) is

connected.

2. Point the remote control at the

remote-controlled socket at a

distance of approx. 50 cm.

3. Push the respective ON button

of the Channel ON/OFF but-

ton

(A, B, C or D) on the

remote control. You can now

remotely switch a connected

device on or oﬀ. Once assigned

the process will complete.

4. Repeat step 1 – 3 with the

other wireless socket.

Note: You can switch several

remote-controlled sockets on

and oﬀ at the same time using

the ON/OFF button

of one

channel. In addition, you can

programme six remote controls

one after the other and use

them for individual receivers.

This means you can switch one

appliance on and oﬀ from up

to six diﬀerent places. In this

case, synchronise every remote-

controlled socket with the chan-

nel of the remote control.

Note: The coding of the remote

control is maintained when you

change the battery.

Note: If you disconnect the re-

mote-controlled socket from the

power supply, the codings will

be permanently stored.

Deleting a code:

First repeat steps 1 – 2 to

delete a code.

Then push the desired OFF

button of the Channel ON/

OFF button

(A, B, C or D)

you wish to delete on the

remote control during the

30 second timeframe.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 303937 - IP44 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 303937 - IP44 Manual

Product: