755709
18
Zoom out
Zoom in
Previous page
1/61
Next page
18 GB/IE
Preparing the product for use / Cleaning and care
Note: The function display 3 ceases to illu-
minate.
Selecting the temperature:
Just before using the foot warmer, set it to the
highest temperature setting (setting 6). This will
cause the foot warmer to warm up quickly.
The foot warmer can of course be used at any
time if it is switched off. Its teddy plush lining
will warm your feet even if an electric socket is
nowhere near.
When operat-
ing the foot warmer for several ho
urs,
we recommend setting the control
unit 2 to the lowest temperature set-
ting to prevent overheating of the feet
and subsequent potential skin burns.
Temperature levels
Set the required temperature level on the
control unit 2.
Level 0: off
Level 1: minimum heat
Level 2–5: customised heat
Level 6: maximum heat
Automatic switch-off
Note: The foot warmer switches itself off automati-
cally after about 90 minutes. The function display 3
then starts to flash.
Then select the setting 0 and after about
5 seconds, reset the foot warmer to the desired
temperature setting to switch it on again.
Note:
Switch the foot warmer off (setting 0) and pull the
mains plug out of the mains socket if the foot warmer
is not to be used after it has switched off automati-
cally.
Cleaning and care
DANGER TO
LIFE BY ELECTRIC SHOCK! Al-
ways remove the power plug from
the socket before cleaning the foot warmer.
Otherwise there is a risk of electric shock.
Use a dry, lint-free cloth for control unit 2
cleaning and care.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY!
Never immerse the control unit 2
in water or other liquids. It may otherwise be
damaged.
Use a damp cloth and if necessary a little mild
detergent to clean small stains on the foot
warmer.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY! Do
not use chemical cleaning or scour-
ing agents to clean the foot warmer and con-
trol 2. The foot warmer and control unit 2
may otherwise be damaged.
RISK OF DAMAGE TO THE
PRODUCT OR PROPERTY!
Please note that the foot warmer
must not be washed in a machine, dry-cleaned,
wrung out, tumble-dried, mangled or ironed.
The foot warmer may otherwise be damaged.
Do not wash.
Do not bleach. Do not use any
cleaning agents containing bleach
(such as heavy duty detergents).
Do not dry in a tumbler dryer.
Do not iron.
Do not dry-clean.
The removable teddy lining 1 can
be washed by hand. Use a mild
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 303828 SFW 100 C4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 303828 SFW 100 C4 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info