Manual Silvercrest IAN 301634 SSE 6 D1 (page 18 of 62) (English, German, Dutch, French, Polish, Swedish)

753990

Zoom out

Zoom in

1/62

18 GB/IE

Setup / First use

Place the product on a suitable, level

surface.

Open the lid 1.

Pull the plug 2 from the soap reﬁll

opening 3.

Pour liquid soap into the soap tank.

Note: During ﬁlling, note the "Max"

mark that is visible, if you look into the

soap tank. Never exceed the "Max"

mark when ﬁlling with soap! Otherwise,

the product may overﬂow (see Fig. A).

Note: Pour in at least 70 ml of soap;

otherwise, the "Fill level" indicator 13

will ﬂash.

Replace the plug 2 in the soap reﬁll

opening 3.

Remove the protective ﬁlm from the

display 9 and close the lid 1. The

product is now ready for use.

Display indicators

Note: The display indicators are only visible

if the lid 1 is open.

The “Soap quantity” indicator 12 shows

the amount of soap dispensed for each

use.

The “Fill level” indicator 13 shows how

much soap remains in the soap tank.

The fewer bars are visible, the less soap

there is in the soap tank. If only one bar

remains the “Fill level” indicator 13 be-

gins to ﬂash. Reﬁll the soap tank.

Note: Pour much soap in the soap tank

until the display stops ﬂashing.

The “Battery” indicator 14 shows the

charge level of the batteries that have

been inserted. If only one bar remains

you should replace the batteries soon.

Using the product

Set the quantity of soap you want dis-

pensed for each use. Press the “+” button

10 or “-” button 11 repeatedly until the

desired setting is displayed. You can se-

lect from four soap quantities. The more

drops displayed in the “Soap quantity”

indicator 12 , the more soap is dispensed.

Hold your hand underneath the soap

outlet 8. The product starts dispensing

soap.

As soon as dispensing stops, you can

withdraw your hand.

Note: The soap dispensing also stops

as soon as you withdraw your hand. This

is true even if the programmed quantity

has not yet been dispensed.

If you do not intend to use the product

for long periods, press the “-” button 11

repeatedly until “OFF” appears in the

display 9.

Press the “+” button 10 to turn the product

back on.

Note: If you need to remove a large

quantity of soap from the soap tank, you

can let the soap dispensing run for 30

seconds: Press the „+“ button 10 and

the „-“ button 11 simultaneously and

hold them for about three seconds. The

product begins dispensing soap and stops

after 30 seconds.

Note: If you have not used the product

for several days, you may have to activate

the soap dispensing function several

times in a row before soap is dispensed

again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 301634 SSE 6 D1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 301634 SSE 6 D1 Manual

Product: