755688
22
Zoom out
Zoom in
Previous page
1/88
Next page
GB│IE 19
STK 650 A2
4) Remove the brewing system and pull the riser pipe q with the sieve w
upwards.
5) Add the desired quantity of tea or teabags to the brewing chamber 0.
NOTE
Ensure that no tags or bag threads remain in the device.
6) Replace the brewing system in the jug 3. Ensure that the riser pipe q fits
into the recess on the floor of the jug 3. The brewing chamber 0 must be
inserted with the flattened side towards the handle 2.
7) Close the lid 1.
8) Replace the jug 3 on the base 5.
9) Insert the mains plug into a mains power socket and set the On/Off switch 8
to the position "I". The control lamp 4 and the On/Off switch 8 light up.
The water is now boiled, pressed upwards through the riser pipe q and flows
through the brewing chamber 0 back into the jug 3.
After the water is boiled, the appliance switches to the keep-warm function. The
control lamp 4 goes out. Only the On/Off switch 8remains lit up. As soon as
the water cools down, the tea maker boils it again. The control lamp 4 lights up
again during the boiling process.
NOTE
As the water is fed back through the brewing system when it is re-boiled,
remove the brewing system from the jug 3 after the first brew.
WARNING! RISK OF INJURY!
The brewing system is very hot! There is a risk of burns! Use oven gloves
when you touch the brewing system.
NOTE
The longer you keep the drink warm and the more liquid evaporates, the
stronger the drink will become. We therefore recommend drinking the tea
as quickly as possible after it is initially brewed.
You can interrupt the boiling process at any time. To do this, set the On/Off
switch 8 to the "0" position. The boiling process stops.
Once you remove the jug 3 from the base 5 the boiling process stops.
CAUTION! PROPERTY DAMAGE!
Always allow the jug 3 to cool down before refilling it with cold water
for another brewing cycle. Otherwise, excessive tension in the glass could
cause the jug 3 to break.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 297423 STK 650 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 297423 STK 650 A2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info