796028

Silvercrest HG07567 - IAN 352672 Manual

11
Zoom out
Zoom in
Previous page
1/49
Next page
11 GB/IE/NI
= 1. Remove any load from the weighing surface
1, if any.
2. Set the product on a solid, level and flat surface.
3. Reset the product by holding the button UNIT 4
for approx. 3 seconds.
4. The product is re-calibrated and the whole
LC display 2 will be shown
for 2-3 seconds.
5. The numerical display 7 will read “0“ again
with the default unit.
6. You could place the item you wish to weigh
onto the product.
=
= The product is overloaded.
= 1. Remove the overload.
2. Reset the product by holding the button
UNIT 4 for approx. 3 seconds.
3. The product is re-calibrated and the whole
LC display 2 will be shown
for 2-3 seconds.
4. The numerical display 7 will read “0“ again
with the default unit.
5. You could place the item you wish to weigh
onto the product.
Note: If is shown again, it means the overload is
greater than the max. measuring range. Remove the
overload.
Note: Be sure never to add more than 5 kg to the
weighing surface 1. Overloading the product can
damage it.
=
= The batteries are too weak to weigh. You cannot
operate the product.
= Replace the battery (see section “Replacing the
battery”).
Note: The product contains sensitive electronic compo-
nents. For this reason it is possible that it can be disr
upted
by radio transmitting equipment in the immediate vicinity.
If the LC display 2 indicates a problem, move such
objects away from it.
Electrostatic discharges can lead to malfunctions. In
cases of the product failing to work, remove the
batteries for a short while and then replace them.
Cleaning and care
Never immerse the product in water or other
liquids. This can damage the product.
Clean the product with a slightly dampened, fluff-
free cloth. To remove more stubborn dirt, you can
also dampen the cloth with a weak soap solution.
You can remove leaked battery fluids with a dry,
absorbent cloth.
Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which are
marked with abbreviations (a) and numbers
(b) with following meaning: 1–7: plas-
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest HG07567 - IAN 352672 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest HG07567 - IAN 352672 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info