694748
17
Zoom out
Zoom in
Previous page
1/63
Next page
17 GB/IE
Insert batteries / rechargeable
batteries according to polarity
marks (+) and (-) on the battery /
rechargeable battery and the
product.
Clean the contacts on the battery /
rechargeable battery and in the
battery compartment before
inserting!
Remove exhausted batteries /
rechargeable batteries from the
product immediately.
Q
Before first use
Note: Remove all packaging materials from the
product.
1. Turn the product over and place it on a soft
underlay to avoid scratching the surface.
2. Loosen the screw located at the cover of the
battery compartment on the back of the product
by using a screw driver.
3. Open the cover of the battery compartment.
4. Remove the insulating strip from the battery
compartment
8
.
5. Close the cover of the battery compartment and
tighten the screw by using a screw driver.
Q
Replacing battery
. Turn the product over and place it on a soft
underlay to avoid scratching the surface.
2. Loosen the screw located at the cover of the
battery compartment on the back of the product
by using a screw driver.
3. Open the cover of the battery compartment.
4. Remove the used battery from the battery
compartment
8
.
5. Insert the new battery (as specified in section
Technical data“).
Note: Make sure you insert the battery with the
correct polarity. This is indicated in the cover of
the battery compartment.
6. Close the cover of the battery compartment and
tighten the screw by using a screw driver.
Q
Operation
Q
Weighing
Note: Starting with or without the weighing bowl
1
,
the product always starts at zero reading (the tem-
perature will also be shown) when you switch it on.
Note: Zero reading means 0 in g or 0:0.0 in lb:oz
or 0.00 in oz.
However, if you place the weighing bowl
1
on the
product after you have switched it on, the product
will indicate the weight of the weighing bowl
1
.
Press the TARE button / Timer button
6
to reset
the numerical display
9
to zero reading. The TARE
symbol
13
will appear.
Place the weighing bowl
1
on the product.
Press the ON / OFF button
2
to switch the
product on.
Select the unit of weight by pressing the unit of
weight button
(UNIT) / Timer button
5
. After
each time it is
pressed, the unit display
11
will
switch to the next unit listed: kg / g -> lb / oz -> o
z.
Place the food you wish to weigh in the weigh-
ing bowl
1
.
The LCD readout
4
indicates the weight of the
food in the selected unit of weight.
Important! Be sure never to add more than 5 kg
to the weighing bowl
1
. Overloading the product
can damage it.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest HG04425 - IAN 304860 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest HG04425 - IAN 304860 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info