Manual Silvercrest HG00646 - IAN 284931 (page 16 of 52) (English, German, Dutch, French, Portuguese, Spanish)

668045

Zoom out

Zoom in

1/52

16 GB/IE

Replacing the battery

(see Fig. G)

1. Replace the battery when the product is not in

use.

2. Open the battery compartment cover

described in chapter „Initial use“.

3. Remove the drained battery by pulling the lo-

cking tab

until the battery is automatically

released. Remove the battery from the battery

compartment

Note: The LC display

will show then to

replace the battery. When standing on the pro-

duct if the battery is low, the LC display

will

display “Lo” (see Fig. C) and the product will

automatically switch oﬀ.

Note: When the product displays “Lo”, re-

place the drained battery with a new battery

of the type speciﬁed under „Technical data“.

4. Insert a new battery in the battery compart-

ment

. Be sure to insert the battery correctly,

with the “+” pole up. The battery must be

pushed into the battery compartment

until

secured in place by the locking tab

5. Close the battery compartment

as descri-

bed in chapter „Initial use“.

Setting the units of weight

Note: The standard unit of weight is kilogram (kg).

The factory default setting for the product as sup-

plied is “kg”.

Press the kg / lb / st button

which is on the

back of the product, to select the unit of

weight. The units will be displayed in the

LC display

as follows:

Kilogram (kg): see Figure A

Pound (lb): see Figure E

Stone (st): see Figure F

Switching on your product /

measuring your weight

Tip: Weigh yourself at the same time of day

(preferably in the morning) after visiting the toilet,

with an empty stomach and without clothing to

ensure that your results are comparable.

Place the product down on a solid, ﬂat horizon-

tal surface.

Step on to the product.

Place even weight on each leg.

If at all possible stand on the same areas of the

platform

each time and do not move. Mov-

ing during the weighing process can lead to

discrepancies in the results.

The product will start to measure immediately.

After blinking 3 times, the weight LC display

will display the result, as shown in, for ex-

ample, Fig. B.

Note: If the product shows “oL” (see Fig. D), it

signals that the product is overloaded. Observe

the maximum capacity of 180 kg (396 lb / 28 st).

Step oﬀ the platform

. The product switches

oﬀ automatically after about 10 seconds. Until

then the weight measurement remains visible.

Note: After a change of location and follow-

ing every battery change, the product must be

re-calibrated. To do this, proceed as follows:

Step onto the product. The product will show

you an incorrect measuring result. Step oﬀ the

platform

. The product will calibrate auto-

matically.

Wait until the product switches oﬀ automatically.

Step onto the product once again. The product

will show you the correct measuring result.

Troubleshooting

This product has delicate electronic compo-

nents. This means that if it is placed near an

object that transmits radio signals, it could

cause interference. If the LC display

indi-

cates a problem, move such objects away from it.

Electrostatic charge can lead to the product

failing. In cases of the product failing to work

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest HG00646 - IAN 284931 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest HG00646 - IAN 284931 Manual

Product: