663329
10
Zoom out
Zoom in
Previous page
1/43
Next page
10 GB/IE
Troubleshooting / Cleaning / Disposal / WarrantyGetting started / Troubleshooting
Q
Removing part of the weight
from the kitchen scale
Place the weighing bowl
1
on the weighing
platform
6
.
Press the On / Off / Zero button
5
to switch
on the kitchen scale
2
.
Wait until the LC display
4
stops and stabilizes
on 0 g
17
, 0:0.0 lb:oz
20
or 0 ml
18
or
0.0 fl’oz
19
, which will be the mode the kitchen
scale was in when it was last switched off.
Press the mode button
3
to set the weighing
mode
23
(preset to g or lb:oz).
Place the substance to be weighed into the
weighing bowl
1
to start the weighing process.
The LC display
4
shows the weight of the first
substance placed in the weighing bowl.
Press the On / Off / Zero button
5
to reset the
LC display
4
to zero.
Now remove the desired amount of substance
from weighing bowl
1
. The LC display
4
shows the weight of the substance removed
from the weighing bowl as a negative value.
Q
Automatic or manual switch-off
The kitchen scale switches itself off automatically
if it has not been used for 2 minutes.
Press the On / Off / Zero button
5
for longer
than 3 seconds to switch off the kitchen scale.
Q
Volume units display mode
Place the kitchen scale on
a solid, flat surface.
Press the On / Off / Zero
button
5
to switch on the
kitchen scale
2
.
Wait until the LC display
4
stops and stabilizes on
0 g
17
, 0:0.0 lb:oz
20
or
0 ml
18
or 0.0 fl’oz
19
,
which will be the mode the
kitchen scale was in when
it was last switched off.
Press the mode button
3
until milk
22
or water
21
appears as the volume
mode with the units as ml
or fl’oz.
Place a container for liquid
or the weighing bowl
1
on the weighing platform
6
.
Press the On / Off / Zero button
5
to set the
LC display
4
to zero (0 ml or 0.0 fl’oz). Pour
milk or water (as selected previously) into the
container.
The LC display
4
now automatically shows
the volume of liquid poured into the container,
either in ml or in fl’oz, depending on the setting.
Then press the mode button
3
to set the kitchen
scale to weighing mode again and read off the
equivalent weight of the liquid.
Q
Troubleshooting
Error Cause Solution
The LCD readout
4
indicates “Err” and
does not change.
The maximum capacity of
the kitchen scale
2
of
5 kg / 11 lb has been
exceeded.
Remove the food from the kitchen scale
2
.
Switch the kitchen scale
2
off and then back
on again.
Reduce the amount of food and weigh it in
several steps.
The LCD readout
4
indicates “Lo”.
The battery is empty.
Replace the battery as described in the
“Replacing the battery” chapter.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest HG00496 - IAN 273591 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest HG00496 - IAN 273591 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info