575416
9
Zoom out
Zoom in
Previous page
1/14
Next page
H-3246
7
Note:
If you want to fry only small
quantities, less oil or fat may be enough.
But the items to be fried must always be
completely covered.
2. Insert the mains plug into the mains
socket.
6.2 Melt existing fat
If the fryer already contains solidified fat from
an earlier frying session it must be melted in
the fryer. You have to do this very carefully so
that the melting fat does not start to spit or the
fryer does not overheat.
1. Insert the mains plug into the mains
socket.
Caution!
Ensure that you don’t damage the
heating element
5
with the fork.
2. Use a fork to prick a few holes in the fat
so that any steam formed can escape
more easily.
3. Press the unlock button on the handle
16
and place the lid
12
on the frying
insert
8
.
4. Use the On/Off switch
10
to switch the
stainless steel fryer on. The red pilot
lamp lights up.
5. Set the temperature control device
9
to
60 °C.
6. Let the fat melt.
7. Wait until the temperature pilot lamp
11
lights up or until the fat has melted
completely.
7. Frying
1. Use the On/Off switch
10
to switch the
stainless steel fryer on.
2. Place the lid
12
on the frying insert
8
.
3. Set the temperature control device
9
to
the desired frying temperature.
Refer to the pack of what you are frying
for the correct frying temperature.
The temperature pilot lamp
11
goes out.
The oil or fat has now heated to the
desired temperature. The temperature
pilot lamp
11
lights up in green as soon
as the oil or fat has reached the set
temperature. To keep the oil or fat at
temperature the thermostat automatically
switches the heating on and off. You can
see this when the temperature pilot lamp
11
regularly goes on and off.
Note:
We recommend that you heat the oil
for at least between 10 and 15 minutes
before you start frying. To do this, place the
lid
12
on the frying insert
8
.
Note:
You can leave the frying basket
17
in
the fryer during heating.
Warning!
When frying frozen
items, pay attention to Tip 2 (see
"12. Various tips" on page 10) to
prevent spits of fat.
Caution!
Please do not overfill the frying
basket
17
. Please read the food
manufacturer’s information about the optimum
amount. The food to be fried must be
completely covered by oil or fat.
In the frying basket
17
you will find a marking
"MAX FOOD LEVEL”
18
that indicates the
maximum level to which items to be fried may
be filled.
4. Remove the frying basket
17 from the
stainless steel fryer and place the items
to be fried in it.
RP46891-Fritteuse LB6 Seite 7 Donnerstag, 7. Januar 2010 5:34 17
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest H 3246 - IAN 46891 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest H 3246 - IAN 46891 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest H 3246 - IAN 46891

Silvercrest H 3246 - IAN 46891 User Manual - German, Dutch, French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info