811331
96
Zoom out
Zoom in
Previous page
1/136
Next page
4 GB
kWh
8
12
13
18
7
9
11
10
19
18
17
16
A
UP DOWN PRICE SET
45
20
1415
1
236
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 4
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
5 GB
21
B22
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 5
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
6 GB
Introduction
The following pictograms are used in these
operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution electric shock! Danger to life!
Risk of explosion!
Keep children away from electrical devices!
For use in dry rooms only.
V ~ Volt (AC)
WWatts (Effective power)
Hz Hertz (mains frequency)
AAmp
kWh Kilowatt hour
Direct current (Type of current and voltage)
Proper procedure and handling.
Dispose packaging and appliance in an
environmentally-friendly way!
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 6
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
7 GB
Introduction
Energy Monitor
Q
Introduction
Familiarise yourself with the product before using
it for the first time. Please read the following
operating manual and safety instructions carefully.
Always use the instrument only as described and for the stated
areas of use. Keep this manual in a safe place. Make sure
that all documents accompany the instrument if you pass it
on to anyone else.
Q
Proper Use
The appliance is designed to measure the power consumption
of electrical appliances and to calculate electricity and oper-
ating costs. Any other use or modification of the instrument
constitute improper use and carry a serious risk of accident.
The manufacturer is not liable for damage caused by improper
use. The instrument is not intended for commercial use.
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 7
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
8 GB
Introduction
Q
Supply Scope
1 x wattmeter
2 x round cell batteries (Alkaline LR44, 1.5 V )
1 x operating manual
1 x warning labels for the battery compartment cover in
other languages
Q
Description of Parts
1 LC display
2 SET button
3 PRICE button
4 DOWN button
5 UP button
6 Socket
7 OVERLOAD / overload symbol
8 Watt symbol / overload warning value power consump-
tion (W)
9 Ampere symbol / overload warning value current
consumption (A)
10 Volt symbol
11 Hz / mains frequency symbol
12 TIME / time symbol
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 8
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
9 GB
Introduction
13 € / cost symbol
14 2nd electricity tariff
15 symbol (setting the time)
16 Total symbol
17 Kilowatt-hours symbol
18 Power factor / power factor symbol
19 PRICE kWh / price per kWh symbol
20 Max symbol
21 Battery compartment cover
22 Plug
Q
Technical Data
Model: EM 240-A DE
Input voltage: 230 V ~, 50 Hz
Max. permissible load: 16 A ~, 3500 W
Type of battery: 2 x LR.44 (Alkaline)
1.5 V
Lower limit range
for current measurements: 0.005 A
Ampere indicating range: 0.00 - 16 A
Volt indicating range: 190 - 276 V ~
Watt indicating range: 0 - 3500 W
Kilowatt hour indicating range: 0.00 - 9999 kWh
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 9
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
10 GB
Introduction / Safety Instructions
Mains frequency indicating range: 40 - 70 Hz
Resolution: 0.5 W
Enviromental conditions:
Altitude: max. 2000 m
Temperature: + 5 °C - + 40 °C
Relative humidity: max. 90 %
Tolerance range:
in volts: ± 3 %
in amperes: ± 3 %, ± 0.01 A
in watts: ± 3 %, ± 2 W
Dimensions of LCD: 3.2 x 3.2 cm (W x H)
Safety Instructions
WARNING! Please read all the safety information
and instructions. Failure to observe the safety information
and instructions can result in electric shock, fire and / or
serious injury.
PLEASE RETAIN ALL SAFETY INFORMATION AND
INSTRUCTIONS FOR FUTURE REFERENCE.
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 10
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
11 GB
Safety Instructions
How to avoid fatal injury
by electric shock!
J Inspect the wattmeter, additional equipment and the
electrical appliances you wish to test before every use to
ensure that they are intact. Damaged electrical appliances
and buckled / kinked mains leads or bare wires increase
the risk of an electric shock.
J Do not operate the wattmeter if mains leads or mains
plugs on the electrical appliances you wish to test are
damaged.
CAUTION! Damaged mains leads pose a risk of fatal
injury by electric shock.
J The connector plug 22 of the wattmeter must fit into the
outlet. The connector plug 22 must not be modified in any
way. Do not use adapter plugs in conjunction with earthed
electrical appliances. Using unmodified mains plugs and
proper outlets reduces the risk of an electric shock.
J Avoid physical contact with earthed surfaces such as those
of pipes, heaters, ovens and fridges. There is an increased
risk of an electric shock if your body is earthed.
J Keep the wattmeter away from rain and
moisture. If water enters the wattmeter there
is an increased risk of an electric shock.
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 11
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
13 GB
Safety Instructions
electric shock. Children often underestimate dangers.
Always keep children away from the product.
J CAUTION! DANGER OF EXPLOSION!
Never operate the wattmeter where there is
any risk of explosion, i.e. close to inflammable
liquids or gases.
J Never exceed the stated maximum input voltage.
J Avoid strong vibrations or shocks.
J Never expose the wattmeter to extreme temperatures,
extreme sunlight, humidity or moisture.
J Never expose the wattmeter to extreme temperature
fluctuations. Do not use the wattmeter until it has become
adjusted to the ambient temperature.
J Never operate the wattmeter close to strong magnetic
fields such as motors, transformers or similar.
J Do not place the wattmeter face down on workbenches
or working surfaces. This helps to prevent damage to the
operating elements and the LCD 1.
J Remove the batteries from the wattmeter if you do not
intend to use if for any length of time.
J Do not connect after each other.
J Use the power cost meter only in buildings equipped under
Installation Category II (CAT II) according to IEC 664.
The maximum peak voltage must not exceed 2500 V ~.
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 13
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
14 GB
Safety Instructions
The main electricity supply for residential buildings usually
falls under Installation Category II.
Safety Instructions for Batteries!
J Remove batteries that have not been used for any length
of time from the instrument.
J CAUTION! DANGER OF EXPLOSION!
Never recharge batteries.
J Make sure when inserting the batteries that the polarity
is correct. This is indicated in the battery compartment.
J If necessary, clean the battery and instrument contacts
before inserting the batteries.
J Remove spent batteries from the instrument immediately
on account of the increased risk of leakage.
J Batteries must not be disposed of in household waste.
J Consumers are under a legal obligation to dispose of
batteries properly.
J Keep batteries out of the reach of children, do not dispose
of them in fire, do not short-circuit them, and do not take
them apart.
J Failure to observe these instructions may result in the
batteries discharging beyond their end voltage, which
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 14
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
16 GB
Before you start
retighten the two screws firmly.
Note: Make sure that you replace the battery compart-
ment cover 21 the right way round. The rounded corners
of the battery compartment cover 21 must fit into the
rounded recesses in the battery compartment.
j The wattmeter is now ready for operation.
Q
Set the time
The time is displayed as soon as the isolating strip has been
removed. The symbol 15 also appears.
j Press the “PRICE” button 3 until the time appears in the
bottom third of the LC display 1.
j Press the “SET” button 2 for approx. 3 seconds. The
time display flashes.
j Press the “UP” button 5 to set the hours.
j Press the “DOWN” button 4 to set the minutes.
j Press the “SET” button 2 to switch between 12 and
24-hour format.
j Press the “PRICE” button 3 to confirm your setting.
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 16
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
20 GB
Operation
Q
Delete maximum values
j Use the “UP” button 5 to select one of the two maxi-
mum values (see “Maximum current”, “Maximum power
consumption”).
j Keep the “SET” button 2 pressed for approx.
3 seconds to set the maximum value to 0.
Q
Set the overload warning value
Note: in this mode you have a choice between two overload
warning values. You can set an overload warning value for
the current (A) and an overload warning value for the power
consumption (W).
Note: the overload warning value for power consumption
(W) 8 is set by default to 0,0 W on delivery.
Proceed as follows:
1. Press the “UP” button 5 until the overload symbol 7
(“OVERLOAD”) appears in the top third of the LC
display 1.
2. Now press the “SET” button 2. The ampere symbol 9
starts to flash.
3. Press the “UP” 5 or “DOWN” button 4 to select either
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 20
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
22 GB
Operation
j The LCD 1 now indicates the present mains voltage
in V (volts).
Q
Measure mains frequency
j Press the “DOWN” button 4 until the power frequency
symbol 11 (Hz) appears in the centre of the LC display 1.
j The LCD 1 now indicates the present mains frequency
in Hz (Hertz).
Note: the wattmeter indicates mains frequencies in a
range of 40 to 70 Hz. In Europe a frequency of 50 Hz is
used for the general power supply system.
Q
Show power factor
j Press the “DOWN” button 4 until the power factor
symbol 18 (“Power Factor”) appears in the centre of the
LC display 1.
j The LC display 1 now indicates the power factor.
Note: the power factor expresses the ratio of real
(active) to theoretical (apparent) power consumed by
an electrical device. The power factor can be between
0 and 1. Ideally, the power factor is 1.
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 22
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
98 SE
Användning / Rengöring och skötsel
Q
Återställa produkt
Om produkten utsätts för starka elektromagnetiska högfrek-
vensfält kan det förekomma funktionsstörningar. Återställ
produkten till leveranstillstånd om sådana funktionsstörningar
skulle förekomma, t.ex. knapparna reagerar inte eller displayen
visar konstiga värden. Ta ur batterierna under ett par minuter
och sätt in dem igen (se Byta batterier). Byt plats för mätaren
om funktionsstörningar fortfarande förekommer.
OBSERVERA! Observera att alla data raderas.
Q
Rengöring och skötsel
VARNING! RISK FÖR ELSTÖTAR! Se till att hålla
effektmätaren skyddad för regn eller väta. Inträngande
vatten ökar risken för elstötar.
VARNING! RISK FÖR ELSTÖTAR! Dra alltid ut
effektmätaren ur uttaget och all ansluten elektrisk utrustning
innan rengöring eller skötsel påbörjas.
j Rengör produkten med torr, luddfri trasa.
56861_Energiekostenmessgeraet_Content_GB-FI-SE-DE.indd 98
25.11.10 16:57
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest EM240A - 56861 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest EM240A - 56861 in the language / languages: English, German as an attachment in your email.

The manual is 6.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest EM240A - 56861

Silvercrest EM240A - 56861 User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info