663555

Silvercrest EDS SKGE 2000 A1 - IAN 104359 Manual

11
Zoom out
Zoom in
Previous page
1/100
Next page
SilverCrest EDS SKGE 2000 A1
English - 9
Setting II = Heat up
Setting III = Medium level of grill
Setting MAX = Maximum level of grill
As soon as the contact grill is connected to the mains socket, the POWER LED (7) lights up and
the contact grill starts to heat up. When the set temperature is reached, the READY LED (8) also
lights up.
Place the food to be grilled directly on the grill plates (3 and 6). The contact grill heats up
again once the temperature drops below the set level. This is indicated by the READY LED (8)
going out at this time.
Turn the food from time to time.
Switch off the contact grill after use by turning the thermostat (9) to "●" and remove the mains
plug from the socket.
Clean the contact grill as described in the section "Cleaning".
Gratinating
This mode (Figure C) is suitable for gratinating food. Proceed as follows:
Turn the thermostat (9) to "●".
Set the slider (4) to " " in order to release the cover.
Open the cover.
Grease the bottom grill plate (6) if necessary with suitable grease, margarine or oil and close
the cover. Please note that butter is unsuitable due to the high temperatures.
Insert the mains plug into a mains socket that is always easily accessible.
Turn the thermostat (9) to the desired setting.
Setting I = Defrost
Setting II = Heat up
Setting III = Medium level of grill
Setting MAX = Maximum level of grill
As soon as the contact grill is connected to the mains socket, the POWER LED (7) lights up and
the contact grill starts to heat up. When the set temperature is reached, the READY LED (8) also
lights up.
Now open the cover and place the food to be grilled directly on the bottom grill plate (6). Set
the slider (4) to a suitable position (I, II, III, IV or V) so that the top grill plate (3) does not touch
the food when you close the cover. Then close the cover. The contact grill heats up again once
the temperature drops below the set level. This is indicated by the READY LED (8) going out at
this time.
Switch off the contact grill after use by turning the thermostat (9) to "●" and remove the mains
plug from the socket.
Clean the contact grill as described in the section "Cleaning".
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest EDS SKGE 2000 A1 - IAN 104359 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest EDS SKGE 2000 A1 - IAN 104359 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info