Manual Silvercrest BTST 9300 (page 54 of 86) (English, Dutch)

566381

Zoom out

Zoom in

1/86

English

Using the Stereo Adapter

Once you have successfully paired the headphones and the stereo adapter, you only need to

connect or disconnect them when you want to use them.

Disconnecting the stereo adapter from the headphones

To disconnect the Bluetooth connection between both devices, press and hold the control

button on the stereo adapter for approx. one or two seconds. The audio connection gets lost

and the blinking frequency of the blue indicator will change from 3 short to 1 short light. The

device is now in idle mode.

Powering the stereo adapter off

In order to power the stereo adapter off after it has been disconnected, press and hold the

control button for approx. four to five seconds. The red indicator on the stereo adapter will

blink 4 times shortly to confirm and the device powers off.

Powering the stereo adapter on

Press and hold the control button for approx. four to five seconds until the blue indicator lights

up to indicate idle mode.

Establishing a connection to the headphones

After the blue indicator on the stereo adapter indicates idle mode, you can establish a

connection with the paired headphones by pressing the control button once. This process may

take a few seconds.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest BTST 9300 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest BTST 9300 Manual

Product: