583490
19
Zoom out
Zoom in
Previous page
1/28
Next page
14
Buttonhole foot
Stitch Stitch width Stitch length
50.5~1
Preparation:
Note:
To prepare the fabric:
Tips:
Remove the zigzag foot and attach the buttonhole foot.
Adjust the stitch length dial between "0.5" - "1". The
density of the stitch depends on thickness of the fabric.
Always test sew a buttonhole.
Measure the diameter of the button and add 0.3cm (1/8")
for the bartacks. If you have a very thick button, add
more to the diameter measurement. Mark the position
and length of the buttonhole on the fabric.
Position the fabric so that the needle is on the mark that
is furthest from you.
Pull the buttonhole foot towards you as far as it will go.
Lower the foot.
a. Turn the pattern selector dial to " ". Sew at
moderate speed until you reach the end mark.
b. Turn the pattern selector dial to " " and sew 5-6
bartack stitches.
c. Turn the pattern selector dial to " " and sew the left
side of the buttonhole to the mark at the end which is
further from you.
d. Turn the pattern selector dial to " " and sew bar
tack stitches.
Remove the fabric from under the foot. Draw the upper
thread through the backside of the fabric and knot upper
and lower threads. Cut the center of the buttonhole with
the seam ripper, being careful not to cut the stitches on
either side.
- Slightly reduce upper thread tension to produce better
results.
- Use backing material for fine and stretchy fabrics.
- It is advisable to use a gimp cord for stretch or knit
fabrics. The zigzag should sew over the gimp. (e)
ab cd
e
Silver Crest SNM 33 A1
19


Need help? Post your question in this forum.

Forumrules
1

Forum

silvercrest-8750

Reset search

  • My Hand where is suddenly TOTALLY right.
    Can you please tell me how to loosen it again.
    Mandy Thanks! Submitted on 27-4-2020 at 13:26

    Reply Report abuse
  • How do I get to the parts for oiling please,it's a great machine .Angela Submitted on 11-11-2019 at 18:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest 8750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest 8750 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest 8750

Silvercrest 8750 User Manual - German - 28 pages

Silvercrest 8750 User Manual - Dutch - 28 pages

Silvercrest 8750 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info