Manual Silver 9300E (page 67 of 74) (English)

664899

Zoom out

Zoom in

1/74

- When operating correctly: 1 beep

- When the memory is full 20 units of pattern: 2-short beeps

- When operating incorrectly: 3-short beeps

- When the sewing machine is in trouble and can't sew: 8 seconds short beeps

It means that the thread is twisted or jammed and the hand wheel axle can't move. Please look

through the "Trouble shooting guide" on page 65/66 to find the solution. After the problem has

been solved, the machine will continue to sew.

Warning beeping sound

Please Note: If the problem is still not solved, please contact your local dealer.

Attention: During the sewing, if the thread get jammed inside the hook stopping the

needle from moving and you continue pressing the foot control, the security switch will

stop the machine completely. In order to restart the sewing machine, you will have to

turn the on/off switch to the "OFF" position and then "ON" again.

Attention: Turn the power switch off and wait until the lamp has cooled down before

touching it.

1. loosen the screw (a) on the

left side of the sewing head and remove

the face plate (b).

Remove plug,

2. If the machine is equipped with a 5W lamp,

replace the bulb as follows:

Pull light bulb downward to remove.

Replace the bulb with same type rated 5W.

Replace the face plate and tighten the

screw.

WARNING FUNCTIONS

REPLACING THE LIGHT BULB

Downloaded from www.Manualslib.com manuals search engine

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silver 9300E in the language / languages: English as an attachment in your email.

The manual is 3,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silver 9300E Manual

Product: