It is easier to guide the fabric and you have a
better view of the seam when using the
standard, regular foot on your machine.
Your sewing machine offers excellent stitch
quality on a wide range of fabrics from
delicate chiffons to multiple layers of denim.
51
Please Note: Always try to sew first without the walking foot
accessory which should be used only when necessary.
The Walking Foot accessory equalizes the
feeding of the upper and lower layers of
fabric and improves the matching of plaids,
stripes and patterns. It also helps to prevent
uneven feeding of very difficult fabrics.
1. Lift the presser foot lifter to raise the
presser foot bar.
2. Remove the presser foot holder by
unscrewing (counterclockwise) the
presser bar attaching screw.
3. Attach the Walking Foot to the machine
as follows:
- The arm (a) should fit into above the
needle screw and clamp (b).
- Slide the plastic attaching head (c) from
your left to right so that it is fitted into
the presser foot bar.
- Lower the presser foot bar.
- Replace and tighten (clockwise) the
presser bar attaching screw.
- Make sure both the needle screw and
the presser bar attaching screw are
tightly secured.
4. Draw the bobbin thread up and place both
the bobbin thread and the needle thread
behind the walking foot attachment.
* The walking foot accessory is optional. It is not included
with this machine.
ALKING FOOT (Optional)W
1
2
3
4
