664894
60
Zoom out
Zoom in
Previous page
1/72
Next page
Always try to sew first without the
walking foot accessory which should be
used only when necessary.
It is easier to guide the fabric and you have
a better view of the seam when using the
standard, regular foot on your machine. Your
sewing machine offers excellent stitch
quality on a wide range of fabrics from
delicate chiffons to multiple layers of denim.
The Walking Foot accessory equalizes the
feeding of the upper and lower layers of
fabric and improves the matching of plaids,
stripes and patterns. It also helps to prevent
uneven feeding of very difficult fabrics.
1. Lift the presser foot lifter to raise the
presser foot bar.
2. Remove the presser foot holder by
unscrewing (counterclockwise) the
presser bar attaching screw.
3. Attach the Walking Foot to the machine
as follows:
- The arm (a) should fit into above the
needle screw and clamp (b).
- Slide the plastic attaching head (c) from
your left to right so that it is fitted into
the presser foot bar.
- Lower the presser foot bar.
- Replace and tighten (clockwise) the
presser bar attaching screw.
- Make sure both the needle screw and
the presser bar attaching screw are
tightly secured.
4. Draw the bobbin thread up and place both
the bobbin thread and the needle thread
behind the walking foot attachment.
WALKING FOOT (Optional)
55
*The walking foot accessory is optional. It is not included with this machine.
a
b
c
1
2
4
3
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 8000E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 8000E in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info