Manual Silver 2021 (page 47 of 50) (English)

664893

Zoom out

Zoom in

1/50

* The walking foot accessory is optional. It is not included

with this machine.

It is easier to guide the fabric and you have a better

view of the seam when using the standard, regular

foot on your machine. Your sewing machine offers

excellent stitch quality on a wide range of fabrics from

delicate chiffons to multiple layers of denim.

The "Walking foot" accessory equalizes the feeding of

the upper and lower layers of fabric and improves the

matching of plaids, stripes and patterns. This foot

helps to prevent uneven feeding of very difficult fabrics.

1. Lift the presser foot bar.

2. Remove the "foot holder" by opening counter

clockwise the presser bar attaching screw. (3)

3. Attach the "walking foot" to the machine in the

following way.

i) The fork arm should fit over the needle screw and

clamp. (2)

ii) Slide the plastic "attaching head" from your left to

right so that it is fitted into the "presser foot bar".

iii) Lower the "presser foot bar".

iv)Replace and tighten clockwise the "presser bar

attaching screw".

4. Make sure both the "needle screw" and the "presser

bar attaching screw" are tightly secured.

5. Draw the bobbin thread up and place both the

bobbin thread and the needle thread behind the

walking foot attachment.

a. Fork arm

b. Attaching head

c. Needle bar

d. Needle screw & clamp

e. Presser foot bar

f. Presser bar attaching screw

Always try to sew first without the walking foot

accessory which should be used only when

necessary.

Walking foot

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silver 2021 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silver 2021 Manual

Product: