664893
28
Zoom out
Zoom in
Previous page
1/50
Next page
How to sew buttonholes (one-step buttonholes)
1. Using tailor's chalk, mark the position
of the buttonhole on the fabric.
2. Attach the buttonhole foot and set
the pattern selection dial to " ".
3. Lower the presser foot aligning the
marks on foot with the marks on the
fabric as shown in fig. (1). (The front
bar tack will be sewn first.)
4. Open the button plate and insert the
button. (fig. 2)
5. Lower the buttonhole lever and push
it back slightly as in fig. (3).
6. While gently holding the upper thread,
start the machine.
7. Buttonhole stitching is done in the
order shown in fig. (4).
8. Stop the machine when the buttonhole
is sewn.
1. Mark the position of the buttonhole
on the fabric with the tailor's chalk,
attach the buttonhole foot, and set
the pattern selection dial to " ".
2. Hook the gimp thread onto the back
end of the buttonhole foot, then bring
the two gimp thread ends to the front of
the foot, insert them into the grooves
and temporarily tie them there.
3. Lower the presser foot and start
sewing.
*Set the stitch width to match the
diameter of the gimp thread.
4. Once sewing is completed, gently
pull the gimp thread to remove any
slack, then trim off the excess.
Buttonhole-making is a simple
process that provides reliable results.
Making a Buttonhole
Making a Buttonhole on Stretch
Fabrics (fig. 5)
When sewing buttonholes on stretch
fabric, place a gimp thread under the
buttonhole stitching.
0.5~1
25
3~7
1
3 4
2
1
4
3
5
2
PUSH
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 2021 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info