664890
51
Zoom out
Zoom in
Previous page
1/67
Next page
3.5
4.5
47
Gathering
Gathered fabric
Remove the presser foot holder and attach the
gathering foot, lowering the tension setting to
below 2.
Suitable for light to medium weight
fabrics.
Place fabric to be gathered under presser foot to
the right of the presser foot.
Sew a row of stitching, keeping the raw edge of
fabric aligned with the right edge of foot.
The stitches automatically cause the fabric to
gather.
To gather and attach gathered fabric in one step
Look closely at the gathering foot to see a slot on
the bottom.
When using the slot, you can gather the bottom
layer of the fabric while attaching it to a flat top
layer, such as the waistband on a dress bodice.
* The Gathering foot accessory is optional. It is
not included with this machine.
Note:
Note:
When testing machine for adjustments
to achieve desired fullness, work with 10"
increments of the fabric, trims or elastic. This
makes it easier to determine the adjustments
and how much change is needed for your
project. Always test on your project fabric
and on the same grainline as will be used in
your finished project.
Sew slow to medium speed for better
fabric control.
- Remove the presser foot holder and attach
gathering foot.
- Place the fabric to be gathered with right side
up under the foot.
- Place top layer of the fabric right side down in
the slot.
- Guide the two layers as illustrated.
1
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 1045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 1045 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info