664890
45
Zoom out
Zoom in
Previous page
1/67
Next page
I
3.5
1.5~3.0
41
Zipper insertion
- Baste the zipper opening on the garment.
- Press open the seam allowance. Place the
zipper face down on the seam allowance with
the teeth against the seam line. Baste the zipper
tape.
- Attach the zipper foot. Attach the right side of
the presser foot pin to the holder when sewing
the left side of the zipper.
- Attach the left side of the presser foot pin to the
presser foot holder when sewing the right side
of the zipper.
- Stitch left side of the zipper from top to bottom.
- Stitch across the lower end and right side of
zipper. Remove the basting and press.
Inserting a centered zipper
Attention: Zipper foot should be used for
sewing width center needle position straight
stitch only. It is possible that needle could
hit the presser foot and break when sewing
other patterns.
5mm
1
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 1045 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 1045 in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info