664889
55
Zoom out
Zoom in
Previous page
1/57
Next page
Before calling for service, check the following items. If the problem still persists, contact the place of
purchase or your nearest authorized dealer.
Problem
Cause
Correction
Upper thread
breaks
Lower thread
breaks
Skipped
stitches
Needle
breaks
Loose
stitches
Seam
gather or
pucker
1. The machine is not threaded correctly.
2. The thread tension is too tight.
3. The thread is too thick for the needle.
4. The needle is not inserted correctly.
5. The thread is wound around the spool holder
pin.
6. The needle is damaged.
1. The bobbin case is not inserted correctly.
2. The bobbin case is threaded wrong.
3. The lower thread tension is too tight
1. The needle is not inserted correctly.
2. The needle is damaged.
3. The wrong size needle has been used.
4. The foot is not attached correctly.
5. The machine is not threaded correctly.
1. The needle is damaged.
2. The needle is not correctly inserted.
3. Wrong needle size for the fabric.
4. The wrong foot is attached.
5. The needle clamp screw is loose.
6. The presser foot that is used is not
appropriate for the type of stitch that you
wish to sew.
7. The upper thread tension is too tight.
1. The machine is not correctly threaded.
2. The bobbin case is not correctly threaded.
3. Needle/ fabric/ thread combination is
wrong.
4. Thread tension is wrong.
1. The needle is too thick for the fabric.
2. The stitch length is adjusted wrong.
3. The thread tension is too tight.
1. Select a finer needle.
2. Readjust the stitch length.
3. Loosen the thread tension.
1. Check the threading.
2. Thread the bobbin case as illustrated.
3. The needle size must suit the fabric and
thread.
4. Correct the thread tension.
1. Insert a new needle.
2. Insert the needle correctly (flat side towards
the back).
3. Choose a needle to suit the thread and
fabric.
4. Select the correct foot.
5. Use the screwdriver to firmly tighten the
screw.
6. Attach the presser foot that is appro-priate
for the type of stitch that you wish to sew.
7. Loosen the upper thread tension.
1. Remove and reinsert needle (flat side
towards the back).
2. Insert a new needle.
3. Choose a needle to suit the thread.
4. Check and attach correctly.
5. Rethread the machine.
1. Remove and reinsert the bobbin case and
pull on the thread. The thread should pull
easily.
2. Check both bobbin and bobbin case.
3. Loosen lower thread tension as described.
1. Rethread the machine.
2. Reduce the thread tension (lower number).
3. Select a larger needle.
4. Remove and reinsert the needle (flat side
towards the back).
5. Remove the reel and wind thread onto reel.
6. Replace the needle.
Reference
Page 11
Page 14
Page 7
Page 7
Page 11
Page 7
Page 10
Page 7
Page 10
Page 14
Page 7
Page 7
Page 7
Page 5
Page 11
Page 7
Page 20
Page 7
Page 10
Page 7
Page 20
Page 14
Page 11
Page 18
Page 7
Page 14
Page 7
Page 14
Trouble shooting guide
51
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 1040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 1040 in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info