664885
22
Zoom out
Zoom in
Previous page
1/54
Next page
Function of machine
Needle up/ down position button (4)
With the Needle up/ down position button, you decide whether the
needle shall stop in the up position or in the material when you stop
sewing.
Please Note: During sewing, press the button will be no function.
Needle up/ down position button setting will only machine stop.
Speed limiting adjustment lever (5)
By adjusting the position of the speed limiting adjustment lever the
top speed during sewing may be limited. The position of the slider
defines the sewing speed at full stroke of the foot controller.
For slower speed: Slide toward left
For higher speed: Slide toward right
When the machine is run with the start/stop button the position of the
speed limiting slider defines the actual sewing speed.
Stitch width adjustment lever (6)
When you select a stitch, the machine will automatically set the
recommended stitch width. The stitch width can be regulated by
sliding the stitch width adjustment lever.
Auto settings are easily determined by sliding the lever. The LED
indicator next to the lever will blink and beep 1 time to indicate the
setting is at the auto position.
When the setting is at the auto position, you can manually change the
width according to your preference. Starting at the auto position,
slide the lever to the left or right to locate each potential adjustment.
At each manual adjustment point, the LED will blink 3 times and
beep once.
For a narrower stitch, slide the lever to left. For a wider stitch, slide
the lever to right. The stitch width can be adjusted between "0.0-7.0".
Certain stitches have limited stitch widths.
18
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silver 1035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silver 1035 in the language / languages: English as an attachment in your email.

The manual is 1,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info