Manual Sigma EF-610 DG SUPER (page 20 of 136) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

542995

Zoom out

Zoom in

1/136

MODELING FLASH

If useing the Modeling flash, you can check the lighting and shadow effects before taking the picture.

1. Press the MODE button and select the mode.

2. Press the

button or

–

button several times to make the icon on the LCD panel

appear.

3. Confirm that the flash is charged, then press the TEST button to fire.

EXPOSURE COMPENSATION

You can use flash exposure compensation in combination with normal exposure compensation to

control the background exposure level. Flash exposure compensation can be set to ±3 stops in 1/3

stop increments (or in 1/2 stop increments with some cameras).

1. Press the MODE button and select the TTL mode.

2. Press the SEL button to make the indicator of mark blink.

3. Press the

button or

–

button to set the compensation

amount.

4. Press the SEL button to make compensation amount indicator

stop blinking.

5. Focus on the subject.

6. Check that the subject is within the flash range displayed on the EF 610 DG SUPER SA-STTL’s LCD

panel.

7. You can take the picture after confirming that the Ready Light of the flash is illuminated.

■ When you set the exposure compensation on the camera, both the flash power level and

background can be compensated.

■ You can use both exposure compensation by flash, and exposure compensation by camera at the

same time.

MULTI FLASH MODE

While the shutter is open, the flash will fire repeatedly. By doing so a series of images of the subject

will be exposed in one frame. A bright subject with a dark background shows more effectively in this

mode. It is possible to set the firing frequency between 1Hz and 199Hz. Up to 100 flashes can be fired

continuously. The maximum number of flashes varies, depending on the flash’s power output and firing

frequency settings. (Please refer to table 3 on the last page).

1. Set the camera’s exposure mode to M mode and set the F

number.

2. Press the MODE button until the Multi-flash mode appears.

3. Press the SEL button until the flash firing frequency starts to

blink.

4. Press the

–

button to set the desired flash frequency

value.

5. After pressing the SEL button again, the flash power level will blink.

6. Press the

–

button to set the desired power level.

7. Press the SEL button again, the number of flashes will blink.

8. Press the

–

button to set the desired number of flashes.

9. Press the SEL button again, the display will stop blinking.

10. When the ready light of the flash is illuminated, the unit is ready to use.

Note: Please set the shutter speed longer than; Number of Flashes you want ÷ Firing Frequency

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sigma EF-610 DG SUPER in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sigma EF-610 DG SUPER Manual

Product: